Radio Shack Televison & Video - Page 5 - Recent Questions, Troubleshooting & Support
Why red charge light keeps blinking?
Is your battery a LiPo (Lithium?) If so ... These special batteries are charged by a computer circuit that holds the charge amperage constant and adjust upward the charging voltage until the required battery voltage is reached. At this time the charger hold a constant voltage and decreases the amperage as the battery capacity is "topped off". the charger circuit charges the entire battery at once but monitors each cell (cells are about 3.7 volts each) and controls the charge so that all the cells are ballanced.
When one of the cells that makes up the battery starts to go bad, the ballance circuitry prevents over charging the others, so one weak cell hold all the cells back from full charge and better charger circuits will signal you with an led or such that the battery is' going' bad.
Remote programing
Programming procedure is too much to type in here by this window, and is not practical. If you wish to get details; check the site linked here. It have set-up code list & set-up procedure to many popular brand remote controls. See it in "
Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/
I need the code in the remote control GE 24959 for controlate the sony dhc az5d Home Theather no one works!!!1 help ,e
You may try the Remote Control Code List for Sony: 10000, 10353, 10834, 10080, 10273, 11685, 11400, 11385, 11904, 11925, 11962
Not finding what you are looking for?