Radio Shack Televison & Video - Recent Questions, Troubleshooting & Support


check for starches
on the disk and try turning the dvd player off and on

Radio Shack... | Answered on Nov 07, 2020


read your instructions --or radio shack site for them

Radio Shack... | Answered on May 04, 2020


If you have the model number of the Radio Shack universal remote, that would help tremendously. There are several that were made.
If it's the model 15-302, here are the codes to try. They may or may not work on other models.

Philips 010,018,020,026,038,043,044,070,101,106, 134,139,150,151,205,210,217,218,257,267,285,290,302,303,314,325,382,396,400, 419,444,445

Radio Shack... | Answered on Mar 11, 2019


This remote control have no set-up codes to Vizio. Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Radio Shack... | Answered on Nov 29, 2018


You can find the manual for the Radio Shack 4-in-1 Remote 15-2142 at ManualsLib and some other sites. A direct link to the PDF of the manual is here: http://www.rockabilly.net/files/manuals/15-2142.pdf . The ManualsLib version of the manual: https://www.manualslib.com/manual/635735/Radio-Shack-4-In-1-Remote-Control.html . The only code listed for a Magnasonic VCR is 0593. No Magnasonic DVD players are listed. If your Magnasonic DVD/VCR was built more than 6 months before the remote was programmed, then the remote has the best chance of having the correct code. The copyright date for the manual appears to be 1999.

I hope this helps. You may want to try searching through all of the codes. Many electronics manufacturers use a common supplier for the IR sensor chip and encoding.

Cindy Wells

Radio Shack... | Answered on Sep 28, 2018


Codes would be for what .you are trying to connect to, not the remote itself

Radio Shack... | Answered on Jun 07, 2018


These are the codes when using your Radio Shack 15-2147 3 in 1 remote control....for Sylvania TV: 0054, 0030, 0171, 1931 for Panasonic DVD: 0247, 0701 Hope this helps.

Radio Shack... | Answered on May 19, 2018


The problem is Memorex does not make their own DVD players instead they have other companies make them and Memorex rebrands them in their name. I would need the DVD Player's model number in order to give you the correct code(s).

Radio Shack... | Answered on May 19, 2018


Sadly the codes for your brand of DVD player are non-existent however I have had limited success using the code 135. Hope this helps. Good Luck.

Radio Shack... | Answered on May 19, 2018


It would be helpful to have the model number for your 3-in-One remote. However, most of the codes are common for your Apex DVD player. These are codes a RadioShack Remote for an Apex DVD player. 0672, 0717, 0755, 0794, 0795, 0796, 0797, 083. Press the button for DVD on your remote. Then press and hold the Program button until it blinks. then, enter your 4-digit code, after entering, the Program button will blink. Aim the remote at the DVD and press the Power button on the remote. If the DVD turns off, then the remote is programmed for the DVD player. If not, repeat instructions and enter another code, until one is found that will turn off the DVD when the power button is pressed.You can also download an owners manual from RadioShack.com with the model number of your unit.

Radio Shack 3 in... | Answered on May 19, 2018


0260,0269,0258,0255. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier.
http://electrohelponline.blogspot.com/
Try this link too
http://remotesearch.blogspot.com/

Radio Shack... | Answered on Apr 13, 2018


Check for fuses first, Some fuses are soldered to the board and not easily identified unless you read the printing on the board. Over volting can cause filter caps to open as well as the power transformer winding's. Some transformers have fuses buried inside, Test the windings with an ohm meter. No reading would indicate an open internal fuse. Doing surgery on that type of transformer can restore it by taking the fuse out and joining the wires.

Radio Shack... | Answered on Mar 31, 2018


so you learn a lesson, the first thing to do is get the paper work together and pack it up and bring it back for credit. my advice is any time you decide to buy anything it is wise to go in the internet
and get a review of what ever you are buying you'll have a better
idea of what to buy.

Radio Shack... | Answered on Feb 08, 2018


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

Radio Shack... | Answered on Dec 31, 2017

Not finding what you are looking for?
Radio Shack Logo

819 questions posted

Ask a Question

Usually answered in minutes!

Top Radio Shack Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76518 Answers

xxxxxx xxx

Level 3 Expert

5023 Answers

Cindy Wells

Level 3 Expert

6239 Answers

Are you a Radio Shack Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...