Puma Watches - Answered Questions & Fixed Issues

Here is the manual https://fossil2020.my.salesforce.com/sfc/p/#6g000008LGWF/a/4v0000005sQs/EzV7SuZf_2g3Vc_HcAkg0fJveyoJ2fJO4.YiC.iCvF0 Made by Fossil https://puma.fgservices.com/s/article/Watch-Instructions-Manual-Puma?language=en_US ..

TRY THE JEWELRY COUNTER AT ANY WALMART

walmart,sears,jeweller,a store

You should specify the width of the strap or bracelet in mm and look for it in Amazon or any retail storehttp://www.amazon.com/Silicone-Soft-Rubber-Watch-Band/dp/B00DU3EX70A good rubber strap might cost between 10 and 20 USD

how to reset date

https://brand.puma.com/time/support www.youtube.com/watch?v=PxcHizUdJk8

Hi Nilavarasan, I have this site for you where you can see the exact service center nearest in your location. Hope it helps. Find PUMA Store or Retailer Near You

You have to leave the light button pressed until you click there and beep and buttons work

How to set with 3 buttons

GO TO EBAY AND SEARCH PUMA REPLACEMENT BAND

did u find a replacement strap for your Drive Chrono Watch PU111F2.0118.032???

download manual off the link belowhttp://www.pulsarwatches.com/home2.asp#FAQ

mcdevito75 here, BEST BET, look for a small watch repair shop in your area for a replacement band.

On most watches, you can only get replacement bands that fit the style of watch through the original vendor. You will have to contact Puma and be ready with the case #s on the back of the watch. Good luck.

email: [email protected] or call 888-565-PUMA

Does the back come off? is there a battery inside?

yes it is the battery problem, any service center accepts battery replacement, find one on your loation. i hope i had been helped you.

click on the top right button to view time, then click bottom right button and hold it as the time is still appears. then it will start blinking. if you press the bottom right button you will be able to swap the command you want to change (H,Min,Y,D,M) and if you press the top right button you can increase (only) the number you like. Left buttons i dont know what they do :P

Make, model, all numbers, please.

Dont have that particular watch, but try this.

Setting the time on the PU910222003 Puma ladies watch.

The process is actually less complicated than you would think.

First, a couple things you need to know and remember.

1. The watch has a safety feature which requires you to press the touch button on the right side of the watch before you can do anything as far as touching and changing anything. If it did not, every time you accidentally touched the dial something would change.

2. Touch means you are touching the dial and the (stones or outer edge)

To change the time, day, date etc, on your PU910222003 you must first press the touch button on the side. The word touch will light up (display) inside the watch on the right side of the dial.

Now you are ready to change stuff.

Touch the dial and the little what looks like bling at the bottom of the watch. You need to be touching the watch dial and these stones at the same time to do anything we are about to do.

While touching and holding the bottom of the dial you may see the back light turn on.

That is actually how you do that.

By continuing to touch and hold the bottom of the dial, you will then see the word hold at the top and then the hour of the time flash.

To increment the time or decrement the time, touch the right side of the dial or the left side of the dial. When you have arrived at the current hour, touch the hour at the top again and the minutes will begin to flash.

Continue to set all settings in this manner until you are satisfied. Touching the top to move to the next setting and right or left of dial to go up or down.

When you are done. Touch the bottom of the dial to exit this setting mode.

Day to day use,

Touch the time at the top of the dial to scroll through the time, chrono, alarm etc. To see time if the screen saver is on, touch the left side of the dial. Touching this repeatedly will also scroll through all the phrases programmed into the watch.

While touching and holding the bottom of the dial you will see the back light turn on.

Cool feature,

This watch actually has two displayable times you can use if you travel often to a second time zone. Press the touch button on the side and touch the right side of the dial. Touching it for a second or two will display the time of the second time zone. Touching and holding for a couple more seconds will cause the T2 on the display of the left side of the watch to flash and eventually switch to the second time. I am thinking that touching the bottom of the watch while displaying the second time should allow you to set this time also.

Dont have that particular watch, but see if this works.

Setting the time on the PU910222003 Puma ladies watch.

The process may be less complicated than you would think.

First, a couple things you need to know and remember.

1. The watch has a safety feature which requires you to press the touch button on the right side of the watch before you can do anything as far as touching and changing anything. If it did not, every time you accidentally touched the dial something would change.

2. Touch means you are touching the dial and the (stones or outer edge)

To change the time, day, date etc, on your watch you must first press the touch button on the side. The word touch will light up (display) inside the watch on the right side of the dial.

Now you are ready to change stuff.

Touch the dial and the little what looks like bling at the bottom of the watch. You need to be touching the watch dial and these stones at the same time to do anything we are about to do.

While touching and holding the bottom of the dial you may see the back light turn on.

That is actually how you do that.

By continuing to touch and hold the bottom of the dial, you will then see the word hold at the top and then the hour of the time flash.

To increment the time or decrement the time, touch the right side of the dial or the left side of the dial. When you have arrived at the current hour, touch the hour at the top again and the minutes will begin to flash.

Continue to set all settings in this manner until you are satisfied. Touching the top to move to the next setting and right or left of dial to go up or down.

When you are done. Touch the bottom of the dial to exit this setting mode.

Day to day use,

Touch the time at the top of the dial to scroll through the time, chrono, alarm etc. To see time if the screen saver is on, touch the left side of the dial. Touching this repeatedly will also scroll through all the phrases programmed into the watch.

While touching and holding the bottom of the dial you will see the back light turn on.

Cool feature,

This watch actually has two displayable times you can use if you travel often to a second time zone. Press the touch button on the side and touch the right side of the dial. Touching it for a second or two will display the time of the second time zone. Touching and holding for a couple more seconds will cause the T2 on the display of the left side of the watch to flash and eventually switch to the second time. I am thinking that touching the bottom of the watch while displaying the second time should allow you to set this time also.