Ps Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 20 Products
  • 28 Answers
  • 4K Views

Hello Rayzberg, to connect a speaker to the PS Audio Stellar M700, you have to do it using a single pair of terminals, one positive (+) and the other negative (-)
You will connect the positive (+) speaker to one of the terminals (+) of the amplifier and the negative (-) of the speaker to the negative (-) terminal of the amplifier
In this way, a speaker will be connected to your PSAudio Stellar M700 amplifier
I hope you can connect, comment if you could do it
Greetings Franco Dosil

Hola Rayzberg, para conectar un parlante al PS Audio Stellar M700, tienes que hacerlo usando un solo par de bornes, uno positivo(+) y el otro negativo (--)
Conectaras el positivo(+) de parlante a uno de los bornes (+) del amplificador y el negativo(--) de parlante al borne negativo(--) del amplificador
De esta manera, estar? conectado un parlante a tu amplificador PSAudio Stellar M700
Espero que puedas conectar , comenta si lo pudiste hacer
Saludos Franco Dosil
https://www.psaudio.com/wp-content/uploads/2017/04/Stellar-S300-and-M700-Owners-Manual-Rev-A-V2.pdf

Ps Car Audio &... | 61 views | 0 helpful votes


we are not them, nor are THEY stated by you,
we can not pretend to be them nor act as you , both are ******* acts.

learn to contact them whom ever they may be. ok./?

Ps Computers &... | 13 views | 0 helpful votes


In this case you should install the newest version of Kodi which is Kodi Krypton 17.6. From here you should try installing a new build. From the sounds of it, its seems as if there must of been a bad file format somewhere within your build download. Once you have downloaded the newer version of kodi, go to your downloads manager and click on the apk file for kodi krypton. Let it install. Once installed go into kodi krypton and then decide which build you are wanting to install. For a decent list of the 2018 kodi builds you can check them out below. With full tutorials and screenshots you should be good to go from here. Hope this helps and good luck with your android box.

Best Kodi Build List for 2018 Must Read Before Installing BestBox

Ps Televison &... | 126 views | 0 helpful votes


this is an infrastructure scheme because it involves not just radios associating with each other but
also a bridge to an external service the 'backbone' network.Your link appears to have a low signal
level for such a short path. I would have expected 5 to 10dB higher. You don't mention your rf setting; I'll assume 23dB.These radios do have a narrow 6deg beam,so that could be an issue. You don't mention your ACK settings, so I can't guess at that.You don't mention your bandwidth settings or the QOS reported by the radios.Two questions perhaps obvious Have you upgraded to the latest firmware? Have you made a speed test at the 'backbone' if so, does it show 10Mbps?

A couple of quick notes First, you're running very old firmware two full levels below current. Update.
Your SNR is low--especially for a short link. It appears you have interference also indicated by a low CCQ number.Do a site survey (from each end) and try to find a channel with less activity.Your rf level is at maximum; radios don't work at their best like that. I would try at least 3dB lower.Of course this will lower your received signal, which is already low. Something is sour in your path; try moving the radios a foot or three in any direction.

Ps tation 5, ... | 384 views | 2 helpful votes


Open following links for RT1 wiring, manual, and ratings:
http://waterheatertimer.org/images/RT1-timer-3-500.jpg
http://waterheatertimer.org/Countdown-timer-horsepower-ratings.html

Add a comment for more help

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

PS RT1W Designer... | 36 views | 0 helpful votes


There are two type lighted switches. One is called the pilot light switch and the other is called an indicator lighted switch. One application for the pilot light would be to tell you if you have the basement lights on. It would be located upstairs in the house near the closed basement door. This way you would know if someone is doing the laundry downstairs without opening the door because the neon would illuminate when the lights were on. The indicator switch would be used in for areas that you want someone to find the switch in the dark. like a elderly persons room. (it is also good as a night light). I wouldn't worry too much about it burning out, Neon can last over 15 yrs !

Ps P&s Double... | 96 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Ps Experts

ray gallant

Level 3 Expert

71004 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Aron

Level 3 Expert

1682 Answers

Are you a Ps Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...