Ps Computers & Internet - Recent Questions, Troubleshooting & Support


we are not them, nor are THEY stated by you,
we can not pretend to be them nor act as you , both are ******* acts.

learn to contact them whom ever they may be. ok./?

Ps Computers &... | Answered on Jun 21, 2019


this is an infrastructure scheme because it involves not just radios associating with each other but
also a bridge to an external service the 'backbone' network.Your link appears to have a low signal
level for such a short path. I would have expected 5 to 10dB higher. You don't mention your rf setting; I'll assume 23dB.These radios do have a narrow 6deg beam,so that could be an issue. You don't mention your ACK settings, so I can't guess at that.You don't mention your bandwidth settings or the QOS reported by the radios.Two questions perhaps obvious Have you upgraded to the latest firmware? Have you made a speed test at the 'backbone' if so, does it show 10Mbps?

A couple of quick notes First, you're running very old firmware two full levels below current. Update.
Your SNR is low--especially for a short link. It appears you have interference also indicated by a low CCQ number.Do a site survey (from each end) and try to find a channel with less activity.Your rf level is at maximum; radios don't work at their best like that. I would try at least 3dB lower.Of course this will lower your received signal, which is already low. Something is sour in your path; try moving the radios a foot or three in any direction.

Ps tation 5, ... | Answered on Feb 01, 2012


Slow performance is mainly caused by corrupted system or data files withing the hard drive. To maximize the full potential of the hard drive and when everything is slowing down formatting it and reinstalling the OS would be a great fix. If anything else fails, then it migh have had acquired too many bad sectors already and might need replacement.

Computers &... | Answered 1 hour ago


On your MYSTERY Computer? Which light? The Disc Activity light is supposed to flash when read and writing data to the hard drive.

Make model (what is is) in all questions. In computer questions. make model, country, BIOS version, and operating system.

Computers &... | Answered 12 hours ago


you can go for Lapentor

Computers &... | Answered Yesterday


Use the software : Wondershare Data Recovery (for Win)

Download it from

http://www.wondershare.com/data-recovery/

Computers &... | Answered Yesterday


F4 is one of what is called function keys. They are keys above the row of number keys which are above the alphabetic keys on the keyboard. The result from pressing a function keys varies by brand of computer. With some computers, you must press a key called the FN key as well as the numbered F4 key in order for what ever that key is programmed to do to proceed. Even more confusing it that you can press the FN key simultaneously with just a sheer number in order to perform other tasks. But there is indeed a key just labeled the F4 key, even if in some cases you must press a FN key as well as it. You need to search for a list of what your function keys do for your brand of computer. For instance "function keys for HP laptops" or "function keys for Toshiba laptops." When you post questions, it is helpful for you to list brand and model of your device.

Computers &... | Answered Yesterday


The fault usually results in a BSOD crash. If you can boot into your desktop long enough, perform the steps below. If the desktop won't stay loaded for long enough, boot your computer into safe mode using the installation media and do it from there.

Fix Windows 10 Thread Stuck In Device Driver error
Performing a series of updates will usually fix this error.

1. Update your graphics and audio drivers to the latest versions.
2. Perform Windows update and install all updates.
3. Update your motherboard BIOS to the latest version.

If those updates don't fix the error, you could check out the following article for more fleshed-out solutions:
[SOLVED] Windows Stop Code Kernel Data Inpage Error

Computers &... | Answered Yesterday


That is a matter of opinion.
https://codeflist.com/blog/best-free-wordpress-table-plugins/

Computers &... | Answered 2 days ago


if you are using the PC's motherboard sound I would upgrade to a soundcard. they are relatively inexpensive and easy to install. www.pricewatch.com

Computers &... | Answered 2 days ago


Page 57 of your user manual say you can register your product in order to receive emails about any software updates to the product. It also goes some way to discuss how to update the software if there is such an update available. From about page 52 onward discusses matters such as connecting your device to the computer's USB port.
The product appears to have multiple functions for recording notes and playing MP3 files. Additionally, it is mentioned that cards may be added to it. The device has a menu item called TOOLS which has a submenu item regarding software updates. It short, you have to download any software updates to your computer and install them to the NowBible device through the USB port in conjuntion with the menu item for software updates. Take a look at page 57 which online is page 62.. https://www.manualslib.com/manual/745230/Danteck-Nowbible-Color.html?page=62#manual

Computers &... | Answered 2 days ago


You can delete history from Google Chrome very easily. Just follow these steps.
1) First click on an icon displayed in following image. you can find this icon below close button on google chrome. then go to History & then click on History.
26109516-w3i35ygaym0a2mtgexp5w2fh-1-0.gif

2) Now you will see all your browsing history. At bottom of history you will see the Clear browsing data button. Just click on that.

26109516-w3i35ygaym0a2mtgexp5w2fh-1-2.gif

3) After clicking you will the following window will open, here just click on displayed Clear browsing data button at below of window.

26109516-w3i35ygaym0a2mtgexp5w2fh-1-5.gif

Now you have successfully cleared browsing history of google chrome.

Computers &... | Answered 3 days ago


Hi that is a boot error - I would advised that as a possible imminent hardware fault on you boot device since you have already run a recovery before

Computers &... | Answered 3 days ago


try searching google for that

Computers &... | Answered 3 days ago

Not finding what you are looking for?
Ps Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Ps Computers & Internet Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18596 Answers

Are you a Ps Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...