Ps Recent Questions, Troubleshooting Help & Support

20 Products
28 Answers
4K Views

I have an onn 50" 4k HD tv that all of a sudden had a few horizontal lines and would loose color and sound then it would freeze the screen and you have to unplug from the wall to turn off it came back on worked fine for 30 minutes started doing the same thing except the screen froze to a green screen with blue and orange dots we unplugged it from the wall I would like to fix it is it the ps boarb and t com board need replacing not sure

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Ps Televison &... | Answered on Nov 26, 2020

0 Answers

Ps the ruko also has a yellow video port that I have a vcr in do I get a splitter 2 female to male to go to video

Ps Televison &... | Posted on Jul 16, 2019 | Be the first to answer

1 Answer

Can I please have my membership card? PS 0093505

we are not them, nor are THEY stated by you,
we can not pretend to be them nor act as you , both are ******* acts.

learn to contact them whom ever they may be. ok./?

Ps Computers &... | Answered on Jun 21, 2019

0 Answers

RDENCA257WJQZ PS board with a defective IC4731. what is the part number of this IC?

Ps Televison &... | Posted on May 29, 2019 | Be the first to answer

2 Answers

PS Audio Stellar M700 mono amplifier has two positive and two negative Outputs, arranged in a row.(-.+,-,+) My question is how to connect speaker cable with two ends.

Hello Rayzberg, to connect a speaker to the PS Audio Stellar M700, you have to do it using a single pair of terminals, one positive (+) and the other negative (-)
You will connect the positive (+) speaker to one of the terminals (+) of the amplifier and the negative (-) of the speaker to the negative (-) terminal of the amplifier
In this way, a speaker will be connected to your PSAudio Stellar M700 amplifier
I hope you can connect, comment if you could do it
Greetings Franco Dosil

Hola Rayzberg, para conectar un parlante al PS Audio Stellar M700, tienes que hacerlo usando un solo par de bornes, uno positivo(+) y el otro negativo (--)
Conectaras el positivo(+) de parlante a uno de los bornes (+) del amplificador y el negativo(--) de parlante al borne negativo(--) del amplificador
De esta manera, estar? conectado un parlante a tu amplificador PSAudio Stellar M700
Espero que puedas conectar , comenta si lo pudiste hacer
Saludos Franco Dosil
https://www.psaudio.com/wp-content/uploads/2017/04/Stellar-S300-and-M700-Owners-Manual-Rev-A-V2.pdf

Ps Car Audio &... | Answered on May 12, 2019

0 Answers

Onida crt tv ic 9370 ps N3 1717 AV input pin details

Ps Televison &... | Posted on Sep 12, 2018 | Be the first to answer

1 Answer

I downloaded a build and now have a blue screen and unable to proceed

In this case you should install the newest version of Kodi which is Kodi Krypton 17.6. From here you should try installing a new build. From the sounds of it, its seems as if there must of been a bad file format somewhere within your build download. Once you have downloaded the newer version of kodi, go to your downloads manager and click on the apk file for kodi krypton. Let it install. Once installed go into kodi krypton and then decide which build you are wanting to install. For a decent list of the 2018 kodi builds you can check them out below. With full tutorials and screenshots you should be good to go from here. Hope this helps and good luck with your android box.

Best Kodi Build List for 2018 Must Read Before Installing BestBox

Ps Televison &... | Answered on May 17, 2018

0 Answers