Princeton Digital Computers & Internet - Recent Questions, Troubleshooting & Support


that means no incoming signal, but some problem i encountered related in vga cable and lost connection on ckt board. as long that the cpu is working and the monitor show (no signal) focus trouble shooting on that parts. replace cable if possible( same port configuration)

Princeton... • Answered on Jun 09, 2018


Cheaper to replace than repair.

Princeton... • Answered on Mar 01, 2018


well the 1117l is a power rating of 1,2 volts 800ma drop out from 13.8 volts, so is there 13.8 volts power any were on the board, if the power drops to lower that 11.8 volts it will not turn on as is got a 1.2v drop by itself so would make it 10.6 volts not including other diodes on the board can become lower. so the regulating volts is 13.8 volts. power supply will be 15 to 16 volts or can be high depending on manufacturer spec's for country. board number can help determine the area of manufacture.

Princeton... • Answered on Jan 30, 2018


It appears that the monitor was designed to work with the display circuits and software driver on a Personal Computer. There is no circuitry in the display to handle the out put of DVD player. A smart TV has the circuitry. the display does not.

Princeton... • Answered on Nov 26, 2017


Monitor is erratic in operation - Power supply issue. Sooner or later the anomaly will become permanent and it will not power on. Just be ready for the eventuality.

Princeton... • Answered on Sep 14, 2017


Depending on which version of windows you have the directions may be slightly different but in the display settings check to see if it is set to extend the display or to duplicate the display both do very different things. Hopefully adjusting this will correct your issue. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/larry_1fe25e09c54eece2

Princeton... • Answered on May 31, 2017


possible that the video card has packed it in and is not responding for duel monitors you could always try going to control panel , display section and check the settings of both monitors and the drivers for both monitors to check the problem monitor change the setting from main display from the good unit to make the other monitor the main display it should change over and the first monitor will then go bad

Princeton... • Answered on Apr 23, 2017

Not finding what you are looking for?
Princeton Digital Logo

Family Lines

419 questions posted

Ask a Question

Usually answered in minutes!

Top Princeton Digital Computers & Internet Experts

Daniel Dollive
Daniel Dollive

Level 3 Expert

315 Answers

The Knight
The Knight

Level 3 Expert

76584 Answers

Tom Chichester

Level 3 Expert

61759 Answers

Are you a Princeton Digital Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...