Prague Watches - Recent Questions, Troubleshooting & Support

GOTO
http://www.watch-clock-makers.org/
Hope this tip helps.
r/ David
http://antiqueclock.clockstop.com/

The Tag Heur repair center says an automatic watch must go through an "initiation" process. They recommend winding manually 40 revolution of the crown clockwise. You must wear an automatic watch at least eight hours per day. Repat the initiation if the watch is not worn for 20 hours or so.

mcdevito75 here, It may be, best bet is to contact Prague watches at www.WatchesOutlet.com online. Once at page, left side of page click contact us and email them with your watches info.

Did you find a solution? If so please provide contact info, would be much appreciated.

Tim,

I had a similar problem with a different model, albeit same internals. Did you find a solution?

I'm fairly sure these are the guys you need to contact http://www.bellross.com/ or 0033 155 353 600 or mail to [email protected] Hope this helps, please ask again if not :)

did you find a solution for this? I had the same problem. Good looking watch jeweler couldn't fix.

I had this same problem with mine. Jeweler was unable to fix but still had never to bill me. The warranty repair shop was some place in new york. I purchased in fall of 04, broke fall of 04.

A New Battery?

Dear pickledpink,

Go to http://www.voguestrap.com/ , you can buy a wristband replacement overthere
Leather,metal,sports...., whatever you need

Hope this was helpful :0)

Kind regards,

Gaby