Powr Flite Vacuums - Recent Questions, Troubleshooting & Support

Good day!

that problem is usually causes of power failure on your machine please try to check the power source if have a loose connection..Please fix it..

Also try to check the power switch normally the power switch got a loose contact if it is defective..
try to check it and replaced it if necessary..

Thank you and good luck.

Powr Flite... • Answered on Jun 16, 2011

I believe you can find it at www.powr-flite.com/category/parts.do?nType=1

Powr Flite 2000... • Answered on Jun 12, 2011

Hi from what i have read about your steam cleaner thr filter should just lift out, failing this, give it a bit of a wiggle to help release it
hope this helps

Powr Flite... • Answered on Mar 03, 2011

In the event you do not have a manual, though it sounds like you do, you can find one at this URL:
The location and telephone number of the company is at the bottom page of the URL. They are located in Ft. Worth, Texas and should be able to provide you with the information and part you need.
If this solution is of help to you, I would appreciate a Thumbs Up.
Be well. Paul

Powr Flite... • Answered on Oct 06, 2010

use till battery is dead, then put a full charge one it, if it has water ports, check to see if at proper level, if still bad, take to have tested, look in phone book(batteries) if it test ok, charger is bad

Powr Flite... • Answered on May 19, 2010

I need a control knob (on off and speed) for a powr-flite pd2500, any ideas when I can obtain one

Powr Flite... • Answered on Feb 26, 2008

I edited your question because it didn't say what I think you meant it to say 'Bidwell PTO heat2'? :>) Why won't my Bissell carpet cleaner turn on? Unplug, and check the end of the hose, tool, and inside the dirt water tank stack and remove any clogs. Let the unit sit unplugged for 30 minutes after removing any clogs for the thermal protector to cool and reset automatically. Then test in a working outlet. https://www.google.com/search?q=bissell+proheat+2x+troubleshooting ..

Vacuums • Answered on May 01, 2021

Can you get to the pump and turn the shaft? 9 out of 10 times the reason that the belt broke was that the pump froze up from residue and rust.

Vacuums • Answered on Apr 28, 2021

Generic problem for all Vacuums
Download instruction manual?
Posted by mvassian on Jul 09, 2008
For the Kenmore 3 in 1 deep cleaner model 20 86603--is that possible? Thanks, Myra

I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The best place to get this type of information is either the Sears / Kenmore website or to cal the Sears / Kenmore factory to have then either download the information or to send out or mail out the information by US Mail. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.sears.com/ Customer Service 1-800-4-MY-HOME 1-800-469-4663
Thanks, Don the Vac Man
Go Ahead. Use Us.

Vacuums • Answered on Apr 28, 2021

Rubbermaid! I hope Hygiene for All is a double act, spam tag team?

Vacuums • Answered on Apr 26, 2021

Makes no difference. Purchasers decorate how they want.

Vacuums • Answered on Apr 26, 2021

Yeah, I also have the same problem. I don't know how to fix it, Man

Vacuums • Answered on Apr 21, 2021

I think it is this robot vacuum cleaner: Bagotte BG800 Robot Vacuum Cleaner I am a cleaning enthusiast. I have used many brands of robot vacuum cleaners, but I found that their cleaning effect is almost the same. I suggest that you can choose a robot vacuum cleaner that is cost-effective in the market as your household cleaning tool. Besides, I have a Poodle. She is very lively, always bouncing on my sofa or bed. So my sofa and bed are full of her hair. Animal hair itself tests the suction and cleaning ability of the robot vacuum cleaner more than other garbage and dust, but Bagotte BG800 Robot Vacuum Cleaner does it. At last, maybe this blog can help you: https://bagottelife.com/blogs/tips/what-is-the-best-robot-vacuum-cleaner-for-pet-hair

Vacuums • Answered on Apr 21, 2021

Some of the Dirt Devils have a reset button on the back, near the bottom. But if the it is getting hot on the bottom, that may mean the motor is trying to run but can't. Maybe something has jammed it. You would have to disasemble it to find out.

Vacuums • Answered on Apr 18, 2021

Not finding what you are looking for?
Powr Flite Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Powr Flite Vacuums Experts

Brad Brown

Level 3 Expert

18666 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Cindy Wells

Level 3 Expert

6259 Answers

Are you a Powr Flite Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides