Power Computers & Internet - Page 9 - Answered Questions & Fixed Issues


Mostly this can be reset by removing the BIOS battery from the motherboard for 10 minutes and then putting it back in. This will mostly reset it. Also, in some computer cases, they have a seperate jumper which you need to activate to reset the BIOS to default state.

If you have a laptop, this becomes way more diffucult, since you have to disassemble the entire laptop to get to te BIOS battery. This is NOT the standard laptop battery btw.

Power Computers... | Answered on Jan 17, 2019 | 29 views


Mostly this can be reset by removing the BIOS battery from the motherboard for 10 minutes and then putting it back in. This will mostly reset it. Also, in some computer cases, they have a seperate jumper which you need to activate to reset the BIOS to default state.

If you have a laptop, this becomes way more diffucult, since you have to disassemble the entire laptop to get to te BIOS battery. This is NOT the standard laptop battery btw.

Power Computers... | Answered on Jan 17, 2019 | 33 views


it's an internal ckrt error you need to have a dealer repair it. unless you know how to troubleshoot electronics and read schematics. there is no quick fix.

Power Computers... | Answered on Jan 14, 2019 | 29 views


You can check this after switching on the computer it you set a password and key board is not working use another keyboard or if the keyboard is USB try another plug

http://bit.ly/2FreOnT

Power Computers... | Answered on Jan 11, 2019 | 25 views


Hello,

Try these steps for your issues:

Home >editing group>selection pane
On the selection Pane each object in the slide appears as the as a separate item in the order they are layered on the slide.
Click the object you want to delete, drag it to the top of list.
On the slide, click the object and delete it.

Power Computers... | Answered on Jan 09, 2019 | 42 views


Replace the batteries. Open and remove batteries and make a note of the size and brand. You can but batteries everywhere or you can order them through the manufacture

Power Computers... | Answered on Jan 07, 2019 | 43 views


Press the RESET button when the Clarion NX706 is turned OFF;Use a Multi-meter and test the yellow and red wire. Make sure always available +12VDC is measured on the yellow wire; meaning +12VDC is measured even when car is off. Test switched +12VDC on the red wire; meaning +12VDC is measure only when the key is turned to acc.

As part of the testing process:
test for +12VDC on the blue/white wire when attempting to turn on the Clarion; test for +12VDC on the blue wire as well.

Power Computers... | Answered on Jan 05, 2019 | 140 views


I think it is expected that at some point some devices in the same band will interfere with each other. Out of 11 or so channels frequently used in the 2.4GHz band, one can only reliably used up to 3, if they are 1, 6, and 11; that is, spaced out as much as possible to minimize overlapping/bleeding and, hence, interference. Maybe you could try changing the Channel on your Wireless LAN or the wireless speaker adapter. If nothing else is using the 2.4 GHz band, there should be no reason why your Wi-Fi and speakers could not co-exist happily...

Power Computers... | Answered on Jan 04, 2019 | 30 views


Hard to determine.
best case result
you have blown up the power supply pcb assembly.
and it might just be a matter of replacing the power supply pcb assembly.
look at this
https://www.fullcompass.com/prod/284725-behringer-q05-00001-77101-power-supply-pcb-for-x32
not sure if this is the exact part
it might have the part number on what ever power supply pcb you have in your device.

Worst case
You have also damaged other pcb boards through causing a spike of power through the epa900

had a computer that a student did this to and was able to just replace the power supply unit and fix the computer.
if new power supply fixes this you may want to glue the 110v/220v switch with an epoxy resin to stop this aqccidently happening again.

Power Computers... | Answered on Jan 01, 2019 | 37 views


This is quite a vague question. Please provide more details.

Power Computers... | Answered on Dec 20, 2018 | 29 views


What exactly is the device that has this problems? An air conditioner?

Power Computers... | Answered on Dec 11, 2018 | 24 views

Not finding what you are looking for?
Power Logo

Ask a Question

Usually answered in minutes!

Top Power Computers & Internet Experts

EKASYS IT SERVICES
EKASYS IT SERVICES

Level 2 Expert

211 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2027 Answers

Are you a Power Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...