Pontiac Car Audio & Video - Recent Questions, Troubleshooting & Support
I have a 2002 pontiac grand am with a theft lock
The radio SERIAL NUMBER is required for a code
First remove the radio from the dashboard.
Then post the radio make+model plus all the letters+numbers on any labels,barcodes or stamped in the metal casing.
This information can then be used to see if a code can be calculated
Radio lock down on my pontiac sunfire 2005. how
Hello... sorry to hear you are having problems. You will have to remove the radio from the dash and retrieve the serial number from the top of the radio. You can then contact a GM dealership service department and they can give you the code. Do not press a bunch of buttons on the radio trying to get it to work because you only have a couple of tries before the radio locks down. Some dealerships charge for this service of giving you the code and some do it as a courtesy. Good luck with your venture and I hope this helps!
20 year car audio/video installer
Bay manager
2001 grand am 2.4l quad four was miss firing.
Sometimes misfires can be cause by a broken piston rod, or bearing causing the gas and air ratio to cumbust prematurely or not at all. I recommend that you take your vehicle to a professional for a diagnosis there usually free and you can know the source of your problem before you spend any more money.
Got a 97 pontiac sunfire with lock code
if this is actually a stereo problem, it must have the oem head unit in it, if this is true it has an anti-theft device in it which will lock the head unit until a password is entered, the only place i know of to find the password is in the manual because the passwords are head unit specific
How to remove radio from 2003 pontiac bonneville
PONTIAC ? BONNEVILLE 2000-2005
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove (2) Phillips screws from the instrument cluster.
3 Unclip the ignition trim and remove.
4 Unclip the climate control/radio trim bezel and remove.
5 Depress the spring clips on each side of the factory head unit and remove.
Buenas tengo un Sunfire 2002 gt dos puertas ,
Este auto esta equipado con un sistema de audio adelantado por lo tanto al reemplazarlo deberia utilizar un adaptador GM VT-GMRC-01 para que pueda mantener el aviso de algunas funciones (warnies) que la computadora envia y ademas este adaptador envia 12 voltios al radio para que este funcione, no le aconsejo que cambie el radio sin este adaptador, por lo demas no hay ningun problema.
Un consejo mas si cambia el radio es mejor cambiar tambien la vocinas para obtener un mejor sonido y aprobechar la calidad del nuevo stereo
Need radio help for a pontica 2000 grand am cant
The
factory radio code can only be retrieved or looked up by the dealer.
Typically the dealer will need your VIN and radio serial number. The dealer may need to remove the radio in order to reset the code in
some cases but I do not believe that it is required for you vehicle.
Help with code radio for my nissan pp2787h
The radio code is a security feature that's meant to deter theft, and it's unique to each vehicle. If you've lost your code, you'll need to contact a Nissan dealership or service center and provide proof of ownership. They should be able to help you retrieve the code. Please do not attempt to use codes from the internet as incorrect attempts may lock your radio.
Is there bluetooth on nsdn-w59
I have the same radio now with no Bluetooth am trying to get Bluetooth on it too without having to buy another radio. Please help.
No sound from wireless headphones in a toyota sienna
First thing to do is check to make sure that the batteries are properly charged.
Second, make sure that you have a clear line-of-site to the IR transmitter. Infrared (IR) works the same way that your TVs remote control works - if the signal is blocked, then you will not hear any sound.
Third, make sure that you are in the rear seat of the vehicle when listening to the sound. The IR transmitter only transmits to the rear seat, so you will not hear any sound if you are sitting in the front seats. This is a common problem that i see.
Lastly, make sure that the heapdhones you purchased are compatible with your 2006 2007 2008 2009 or 2010 Toyota Sienna. Remember that some older models require RF headphones, not IR headphones. I checked http://www.audiovideo2go.com for compatibility before I purchased my headphones. They have a useful listing of all the headphones and models of vehicles they are compatible with.
Not finding what you are looking for?