Pitco fryer showing heat failure even when the pilot light is on?
Question moved from Misc
HEAT FAILURE - This means
the heating system has failed to respond, which can occur because a high temperature limit switch has been tripped and needs resetting. On gas deep fryers, "HEAT FAILURE" may display if the pilot fails to light or if the pilot flame is too weak as detected by the ignition module.
SG-14 backfires when turning on
I seen this problem over and over again, the best and simplest way to fix if to just clean your burners. Removed one by one and get them clean with hot pressure water. Most of the time, this easy and fast job will resolve the problem, and don't forget, get those burners cleaned every 6 mos. It requires a 1/2 in socket.
Fryer's Digital Controller will display "BOIL" if the temperature is it reading does not exceed 212F or 100C for quite some time. Make sure that there is enough level of oil (not water) in the Fry Pot before turning it on.
Pitco fryer sg14
Sounds like propane. Please is heavier than air. Try opening air shutters on burners.
Flames coming out the exhaust
Flames coming out of the exhaust can be caused by several things.
The fryer could be set up for natural gas and it is installed on a propane system. The fryer can be leaking oil near the burner tube and the oil is burning causing excess flame. There could be grease buildup in the flue in the back of the fryer from people hanging the baskets in the wrong place.
Fryer burning orange how do
Hello, So this fryer flame are orange, hey. The air intake needs to be cleaned
and the flame regulator needs to be set. Don't do your self. Have a state
certified technician HAVC clean it and set the flame. In a majority of the
States and Cities to work with Natural/LP gases. You'll need to be certified and
test and license by the state and the have permit by the city to work with gas.
We call this BY-HOYF "burn you hair off of your face" Please have a
professional do this work for you, it could cost you more than the hair on your
face. I wish you luck...GB..stewbison
Not finding what you are looking for?