Could be a dry soldered joint - not unusual in complex electronics but randomly heating lots of joints can cause trouble so it is best to discover the fault first, if possible.
Obtain a service manual and trace the power path with a suitable multimeter.
You could have a bad speaker or wire! If it powers up ok try hooking one speaker at a time and when it shuts down you will know what speaker/channel is causing the problem.
There are a few methods manufacturers use to automatically change the direction of play - sometimes a tight cassette will fool the mechanism into thinking the tape has ended and sometimes it is a matter of the internal control linkages being in such close proximity a slight misalignment can cause the pressing of one button to move another...
The formats that Xbox 360 supports include: MP4, M4V, MP4V, and MOV. So all you need to do is find a proper Blu-ray ripper that can help you convert Blu-ray to MP4 or other supported formats.
Here's one that's been getting positive reviews from users: Leawo Blu-ray Ripper.
It supports a lot of different formats, including the 4 formats that the Xbox 360 supports.
Here's how: Does Xbox 360 Play Blu-ray
Probably not - Bluetooth is listed as a capability but I think if you read the manual, it will be an alternative source or input rather than an output.
Hi Ravindran K, the first thing to determine if it is a problem generated by defective components inside the equipment or outside
To determine this, I suggest you unplug the Pioneer and disconnect all the speakers, then reconnect it to the power outlet and turn it on.
If the fault continues, it is very possible that the power supply and the output stage are bad, in this case consult a specialized technical service
If you do not fail, it may be that some or some cables or speakers that may be defective
To verify this, look at the cables, which are in good condition and with the connection ends with the wires properly threaded
Then go connecting the speakers one by one and test the operation
Take the test and comment
Greetings Franco Dosil
Hola Ravindran K, lo primero que hay que determinar si es un problema generado por componentes defectuosos dentro del equipo o de afuera
Para determinar esto, te sugiero, desenchufa el Pioneer y desconecta todos los parlantes, luego vuelve a conectarlo al toma corrientes y enciendelo
Si continua la falla, es muy posible que la fuente de alimentaci?n y o la etapa de salida se encuentren mal, en este caso consulta un servicio t?cnico especializado
Si no hace la falla, puede ser que alg?n o algunos cables o parlantes que puedan estar defectuosos
Para verificar esto, observa los cables, que se encuentren en buen estado y con los extremos de conexi?n con los alambres correctamente enroscados
Luego ve conectando de a uno los parlantes y prueba el funcionamiento
Haz la prueba y comenta
Saludos Franco Dosil
https://www.manualslib.com/manual/837432/Pioneer-Vsx-D710s.html
Hi David Cason, your VSX552, has a large transformer, the main one and a small one, the waiting one, if this does not work, nothing will work
I attached the service manual, check if this transformer is working
Hola David Cason, tu VSX552, tiene un transformador grande, el principal y uno peque?o, el de espera, si este no funiona, nada va a funcionar
Te adjunto el manual de servicio, controla si este transformador esta funcionando
https://elektrotanya.com/pioneer_vsx-522-k_rrv4296_av-receiver.pdf/download.html
Press TUNE+ & AUTO SURR/DIRECT keys continuously for 2 sec. and it will tell you the fault it encountered if the receiver is in otherwise working condition.