Pioneer Car Audio & Video - Page 5 - Recent Questions, Troubleshooting & Support


You can't directly plug in the Aux cable. The mini-plug for the AVH-285 is on the back of the receiver but it handles both audio and video from a composite source. (Note: this position means that it isn't easily reached when from the passenger compartment.)

You do need the CD-RM10 composite A/V to mini-plug adapter. The mini-plug port is between the video output and the rear/subwoofer outputs on the receiver. See page 35 of the manual for the picture. If your Aux input device has a 3.5 mm audio out (headphone jack), you'll also need a 3.5 mm (F) to RCA (M/M) adapter.

Pioneer has the manual for the AVH-285BT on the product page: https://pioneer-mea.com/en/products/avh-285bt/ . Two current link to the manual is http://pioneer-mea.com/wp-content/uploads/2015/12/AVH-185DVD285BT.compressed.pdf and https://www.pioneer.com.au/wp-content/uploads/2016/10/AVH285BT-Instruction-Manual.pdf .

I hope this helps.

Cindy Wells

Pioneer Car... | Answered on May 24, 2019


red -Acc power
yellow -12 memory power
black -ground
blue -amplifier remote
blue/white -power antenna
SPEAKERS
white left front +
white/black left front -
grey right front +
grey/black right front -
green left rear +
green/black left rear
purple right rear +
purple/black right rear -

Pioneer... | Answered on May 19, 2019


Push and hold the phone button until you get a display, now using the big round button in the middle turn to your right until you get to the Bluetooth set up it will say program or delete and you delete the the paired device, and that takes it back to the factory reset.

Pioneer... | Answered on May 18, 2019


Check out the ground wire , make sure it's attached to bare metal on frame of vehicle.

Pioneer Car... | Answered on May 14, 2019


in that case, go to setting and fine the time and date to set a correct date in your pioneer

Pioneer Car... | Answered on May 14, 2019


go to settings and change it there , Japan word for english is ?? hope this helps.

Pioneer Car... | Answered on May 13, 2019


CHECK THE BACK OF THE UNIT IF THERE IS A MIC PLUG YOU HAVE TO GET A PIONEER MIC AND IT SHOULD WORK

Pioneer Car... | Answered on May 13, 2019


Hello Laurie, I sent you the link to download the user manual of your Pioneer DEHP49001B
I hope you can solve your concern
Greetings Franco Dosi
Hola Laurie, te envio el link para que descargues el manual de usuario de tu Pioneer DEHP49001B
Espero que puedas resolver tu inquietud
Saludos Franco Dosil

https://pioneerelectronics.com/StaticFiles/Manuals/Car/DEH-P4900IB_OM.pdf

Pioneer Car... | Answered on May 12, 2019


1) Hold the source button until the radio shuts off.
2) Hold clock button until clock is displayed.
3) Use < and > buttons to move from hours to min.
4) Use volume up and down to adjust time.
5) Press band button when finished.
6) Press source button to turn radio on.

Pioneer... | Answered on May 10, 2019


Real Answer to set Clock on Pioneer DEH-6 AM/FM/CD car player - DEH-6 will have no FUNCTION button.
1-Press SOURCE ("SRC" - button left of "1") and hold until unit powers off.
2-Press AUDIO ("A" - button upper right) and hold until clock appears in display.
3-Press </> arrows to select hour/minute to set - numbers will blink.
4-Press up/down arrows to increase/decrease hour/minute.
5-Press "BAND" or press "AUDIO" ("A") until unit powers off.
6-To check: Press CLOCK to turn on new clock setting display.

Pioneer Car... | Answered on May 07, 2019


Try to reset it . source ,, it is looking for a source such as CD player radio USB.

Pioneer Car... | Answered on May 07, 2019


I would contact Pioneer they need updates right away i did a lot of searching and asked fellow bass audio friends and they dont know anything of it either must be an older unit.

Pioneer Car... | Answered on May 07, 2019


Mosfet 50wx4 indicates a feature of the Pioneer car radio. It isn't a model number. One Pioneer car radio/CD player with this feature is the DEH-1500. On this model, you need to turn off the unit to set the clock. Press and hold the Source button (to the left of the preset tuning buttons) until the device turns off. Press Audio (upper right corner) repeatedly until the clock appears in the display. Use the arrow keys (Skip/Back or Left/Right) on the right hand side of the radio to select a segment of the time to adjust. Use the Up/Down arrows to set the current time. Repeat choosing the time segment and adjusting the time until both the hour and minutes are correct. Press Band or press and hold the Audio button to exit the clock setting mode.

ManualsLib has the manual for the Pioneer DEH-1500 here: https://www.manualslib.com/products/Pioneer-Deh-1500-Car-Cd-Player-Mosfet-50wx4-Super-Tuner-3-Am-Fm-Radio-3432555.html . See page 16 for the clock setting procedure: https://www.manualslib.com/manual/129844/Pioneer-Deh-1500.html?page=16#manual . See page 6 for the picture of the front-panel buttons for the DEH-1500.

I hope this helps. Please add a comment with the model of the car radio if the above procedure doesn't work for your unit.

Cindy Wells

Pioneer Car... | Answered on May 05, 2019

Not finding what you are looking for?
Pioneer Logo

9,829 questions posted

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

The Knight
The Knight

Level 3 Expert

76321 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Sumeet Sodhi

Level 2 Expert

163 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...