Pioneer Logo

Pioneer Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 3K Products
  • 83K Answers
  • 2M Views

In an era where Best Essay Writing Service in USA are thriving, it has become increasingly difficult for students to identify with a reliable company that offers Top Essay Writing Services and Legit Top Essay Writing.

Pioneer Car... | Answered on May 26, 2020


Just wanted to add my 2 cents for those who might be having the issue of no video but hear audio. I was having the same problem. I had completed the bypass hack with a single throw/single pole (SPST) toggle switch. I could bypass the warning message and hit the OK button but no video. I did hear audio. I searched everywhere but solution 4 worked for me. The thing for me was that next to the black wire on the harness wasn't empty. It had a purple/white wire with some sort of filter (labeled backup camera hook to reverse gear). I tied into this wire before the filter with another wire (I chose a black wire b/c I was grounding it) and grounded it with the black wire (ground) on the harness. I now have video! Maybe the 4 pole relay hack would have worked better but I had only done the toggle switch hack. I hope this helps others and most importantly thank you Salhi.

Pioneer... | Answered on May 26, 2020


I have a Pioneer PDP-LX5090, Kuro Flatscreen TV, connected via HDMI4 on a Pioneer AV-receiver VSX-LX60.
By connection a Chrome cast on one of the HDMI ports of the AV-receiver I got the same CEC100 error with the same message "device cannot be operated. please check the connection". By disconnection the Chromecast from the USB current feed, the problem dissapeared. Hope this can help you.

Pioneer... | Answered on May 23, 2020


the region code means the player does not support the disc your playing each country is given a region code for dvd australias is region 4 if you buy a dvd from another country it wont work you can get multi region codes for dvd players im not sure of pioneers code but try using a dvd from your country region and youl find it works just fine you can also try asking a tech on fixya for the multi region code for the model dvd player you have.


best of luck


merry christmas

Pioneer... | Answered on May 19, 2020


I sounds like you may have a problem in either one of the Regulator circuits, or, one of the Power Amplifier outputs. If the protect circuit detects DC or Low Impedance on one or more of the speaker lines, it will not fire up the high power section of the power supply. Further troubleshooting will require some working knowledge of power amp and power supply circuits. I've got a .pdf copy of the Service Manual if that will help you.
Please let me know what your level of troubleshooting ability is, and whether the manual will help you.
-Petra

Pioneer Audio... | Answered on May 17, 2020


SEE THE INSTRUCTION. GOD BLESS YOU
  • 1
    Turn on your DVD player.

  • 2
    Open the DVD player's main drive, also commonly called the DVD "tray." The region cannot be changed while a DVD is in the machine, so many DVD players require the tray to be open as an extra precaution.


  • Sponsored Links

  • 3
    Push "Info" or "Setup" on your remote.

  • 4
    Use the remote to select the "Region" option as indicated on your TV screen.

  • 5
    Select "Region 9" to change the system to multiregion formatting. Regions 1 through 8 represent specific geographic locations and will not allow multiregion playback.


Read more: How to Change a DVD Player to Multi Region ' eHow http://www.ehow.com/how_5121939_change-dvd-player-multi-region.html#ixzz2VzwQi6NL

Pioneer DV2032K... | Answered on May 15, 2020


It would go into protection mode to stop damaging other components...... until the fault is rectified it will not stop going into protection mode!

Usually this is caused by a short in the wiring, get this tested!

Pioneer Audio... | Answered on May 12, 2020


Power supply issue

Pioneer DCS-303... | Answered on May 09, 2020


if you rent a movie from blockbuster and want to burn it to a dvd

you need a program that breaks the code and then allows you to burn it to a dvd-r or a dvd +r it depends on your dvd burner on your computer for what dvd disk to use. once you find that out and have burned a dvd and it plays on your computer it will play in your dvd player in your car always

the only thing you need to know about your radios formate is if you want to play audio file from ipod or window media file mpeg video some of the pioneer i think play divix video format

just look into your owners manual or go to pioneer.com pull it will give you the formats you head unit will play ....


[email protected]
http://www.tintingbyfredjohnson.com comming soon online store for car audio-lowering kits-air suspension-window tinting homes and cars
http://www.myspace.com/caraudioquestion

Pioneer AVIC-D3... | Answered on May 07, 2020


Check your remote, try and see if you can find where you can default of restore first memory of your set. i think that will help........

Pioneer DV-310... | Answered on May 07, 2020


There are some places in the link. I would contact your local Panasonic service centre to get a genuine one.

https://www.google.com/search?q=pioneer+avic-xd1107zf02+replacement+LCD+Screen

Pioneer Car... | Answered on May 06, 2020


You maybe able to get a region free code for your model player from these WEB sites.
Unlock DVD Players - Region Free Code
www.dvdexploder.com/ www.download-info.com/dvd/index_new.htm

Pioneer... | Answered on Apr 29, 2020


The shaft on the motor is not lined up with the turntable or gear. Adjust the motor (if possible) so it’s properly aligned. Also, clean motor shaft with rubbing alcohol.

Pioneer Audio... | Answered on Apr 21, 2020


CALL RADIO SHACK AND ASK THEM

Pioneer... | Answered on Apr 17, 2020


That all depends what is wrong with it, which you never share.

Pioneer... | Answered on Apr 16, 2020

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pioneer Experts

The Knight
The Knight

Level 3 Expert

76352 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Pioneer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...