Guide does not move on GTO220 is pawl worn?
It should have a gear under the side cover that goes from the crank to line drum to the pawl. You should take the side cover off open face reel Periodicly to lube the gears. It may be so a locking pin in the interior gear.
2/18/2015 1:12:37 AM •
Penn Gt...
•
Answered
on Feb 18, 2015
Who is Senator Stuart Byrd of Bucks County, Penn
I couldn't find a Stuart Byrd in the US Senate. Couldn't locate one in the PA State Senate either. Only thin that comes of is Robert Byrd of W VA. Do you have any other details to add? Place in comment to the original posting.
How to fix Defiance 25LW that will not cast (or free spool)
Those reels are very simple, nothing too complex about them at all, sounds to me that the clutch gear is stuck not and not releasing when you try to engage it. I've had similar bait caster lock up like that when trying to cast heavier baits, what happens is the spool spins so fast that the inertia and vibration causes the reel to actually engage mid cast slamming the gears together. not good for the gears by the way. more that like the reel needs to be opened up and looked at to resolve the issue. www,darksidereelz.com for all your reel service needs
My penn 4300 ss, the
You need to either replace the bail spring or release any tension cause by the bail wire gap being too wide or to small. Take apart the bail wire and adjust the gap so that it doesn't bind when closing the bail.
Require a diagram to assemble 330GTI reel. Reel
Here you go!
330 GTi SchematicMake sure the drag plates and drag washers go in correctly or the drag will not work very well.
If you are using braided superline, make sure there is monofilament backing under the line otherwise the braided line will slip on the spool arbor, tricking you into thinking the drag is shot.
Best of luck!
Mike
5/25/2014 2:01:39 PM •
Penn Gt...
•
Answered
on May 25, 2014
Not finding what you are looking for?