Pelco Computers & Internet - Popular Questions, Answers, Tips & Manuals
Card reader is not reading the card
Thats a slightly difficult problem. Have you tried the card on another reader? Just to eliminate the possibility that the card is not good. If it works on another reader the card reader you have may be bad or somehow got disconnected.
How can i connect dvr5100 from a pc
There are adapters to fit almost everything you might have to purchase 2 to make it possible from cat 5 to adapt to the specific connector either a pin or a usb You might get these on Ebay im not sure which country you are in this might guide you to one
you could get this on Ebay if you dont have an account you will need to create one
https://scgi.ebay.com/ws/eBayISAPI.dll?RegisterEnterInfo
Add Email adress
Add Bank Acc
Add Credit Card
also add your postal adress
also add a paypal account
when you get to the paypal login page at the bottom you will see new to paypal sign up tab
paypal to create an account
paypal registration password ,bank card /credit card,phone numbers home/mobile ,email adress and a postal adress
be very specific when you type in the search
always ask questions? before you make a purchase and keep the email/s for security reasons if the item arrives and its not as described
you will even see the pictures of your item so you cant make a mistake and get them home delivered
hope this helpshttp://www.ebay.com.au/itm/New-Pair-Passive-Video-Transceiver-Video-Balun-Cat5e-BNC-DVR-Cable-Adapter-/221134654499?pt=UK_CCTV&hash=item337ca70c23
11/19/2012 12:47:34 PM •
Pelco...
•
75 views • 0 helpful votes
Need to increase the hard drive to at least 6TB
Nor am I.A 6Tb hard drive cost around $850.You need to check if the Pelco can support a hard drive as large as this and it will need the operating system installed on this hard drive,The Pelco may have a slot to install a second hard drive.
10/19/2012 11:29:05 AM •
Pelco...
•
159 views • 2 helpful votes
Hi I'm getting a KEYBOARD
Turn the computer off.
Disconnect the AC power.
Connect the keyboard
Reconnect the AC power..
Turn the computer on.
If the keyboard is detected, you are "good-to-go".
Otherwise, take the computer to a qualified technician, for professional trouble-shooting & repair.
6/20/2011 2:42:55 AM •
Pelco...
•
1,464 views • 1 helpful votes
I have an older Pelco
If the recovery software is on CD, it should work just fine. You could even replace your older hard disk with one having a greater capacity.
5/9/2011 3:33:02 PM •
Pelco...
•
240 views • 0 helpful votes
I have a pelco pmcl319
First thing I would recommend is to get a flash light and shine on the surface of the screen where the Pelco name normally appears when first turned on. Next press the power button and watch at the center of the display. If you see a gray image of the Pelco name then the ccfl backlighting is no longer functioning. I have been able to order replacement ccfl lamps and if need be inverters that drive those lamps. These part can be purchased from http://www.lcdparts.net/. Disassembly of the LCD display is required as well as some soldering.
Hey sir this asif from
HI I am working in Kharafinational Kuwait, can you arrange me a qty of ten(10nos) power supply card for pelco DSPcolor ccd camera model no:CC3710UH 6X
1/17/2011 7:53:01 AM •
Pelco...
•
192 views • 1 helpful votes
Turned off and on, Now
Commonly there are 2 defective capacitors near the switching transistor located on the power supply PCB that fail causing a no power issue. After replacing these capacitors power on and check operation for any further issues.
Is 3 multiple of 6?why?orwhy not?
Hi,
Yes, Because you can divide 6 by 3 resulting in a real whole number (meaning no fraction).
Hope this helps.
6/24/2010 7:59:18 AM •
Pelco...
•
82 views • 0 helpful votes
Power Reset
First disconnect the plug. Wait 5 min. Plug back in. Then press the menu button and while holding it, switch it on. This should do the trick for most models.
Cheers
TeaCii
LiveOnline to earn money if you have website
Guard to watch you CCTV for $1
Not finding what you are looking for?