Pelco Computers & Internet - Page 2 - Recent Questions, Troubleshooting & Support
Card reader is not reading the card
Thats a slightly difficult problem. Have you tried the card on another reader? Just to eliminate the possibility that the card is not good. If it works on another reader the card reader you have may be bad or somehow got disconnected.
How can i connect dvr5100 from a pc
There are adapters to fit almost everything you might have to purchase 2 to make it possible from cat 5 to adapt to the specific connector either a pin or a usb You might get these on Ebay im not sure which country you are in this might guide you to one
you could get this on Ebay if you dont have an account you will need to create one
https://scgi.ebay.com/ws/eBayISAPI.dll?RegisterEnterInfo
Add Email adress
Add Bank Acc
Add Credit Card
also add your postal adress
also add a paypal account
when you get to the paypal login page at the bottom you will see new to paypal sign up tab
paypal to create an account
paypal registration password ,bank card /credit card,phone numbers home/mobile ,email adress and a postal adress
be very specific when you type in the search
always ask questions? before you make a purchase and keep the email/s for security reasons if the item arrives and its not as described
you will even see the pictures of your item so you cant make a mistake and get them home delivered
hope this helpshttp://www.ebay.com.au/itm/New-Pair-Passive-Video-Transceiver-Video-Balun-Cat5e-BNC-DVR-Cable-Adapter-/221134654499?pt=UK_CCTV&hash=item337ca70c23
11/19/2012 6:36:29 PM •
Pelco...
•
Answered
on Nov 19, 2012
Need to increase the hard drive to at least 6TB
Nor am I.A 6Tb hard drive cost around $850.You need to check if the Pelco can support a hard drive as large as this and it will need the operating system installed on this hard drive,The Pelco may have a slot to install a second hard drive.
10/26/2012 3:38:50 PM •
Pelco...
•
Answered
on Oct 26, 2012
Power went out now my pelco kbd300 isnt working
If no power, it must one resistor of power interface circuit burnt. you need to send it for repair.
if it can be powered up, just can't cotrol. you can try to press the key of F5(AUX OFF), and powered it and hold "AUX OFF" for more 3 seconds and release. this mothod is used for calibrate the joystick.
Hi I'm getting a KEYBOARD
Turn the computer off.
Disconnect the AC power.
Connect the keyboard
Reconnect the AC power..
Turn the computer on.
If the keyboard is detected, you are "good-to-go".
Otherwise, take the computer to a qualified technician, for professional trouble-shooting & repair.
6/20/2011 3:12:47 AM •
Pelco...
•
Answered
on Jun 20, 2011
Not finding what you are looking for?