Pelco Computers & Internet - Recent Questions, Troubleshooting & Support


I don't know that camera myself but the feature you describe sounds like "tracking". You should be able to turn if off via the menu or buttons.

Pelco Computers... | Answered on Jul 09, 2018

To initialize the keyboard, wait five seconds after powering-up the CM6700, enter the number for the
monitor you are viewing (1-4), and press MON. The LED display shows the number entered.
NOTE: You must re-initialize whenever power is cycled.

Pelco Kbd300a... | Answered on Jan 20, 2015

Your hardware is too slow for the video.

Pelco Kbd300a... | Answered on Nov 08, 2014

Commonly there are 2 defective capacitors near the switching transistor located on the power supply PCB that fail causing a no power issue. After replacing these capacitors power on and check operation for any further issues.

Pelco 300 SERIES... | Answered on Dec 07, 2013

First thing I would recommend is to get a flash light and shine on the surface of the screen where the Pelco name normally appears when first turned on. Next press the power button and watch at the center of the display. If you see a gray image of the Pelco name then the ccfl backlighting is no longer functioning. I have been able to order replacement ccfl lamps and if need be inverters that drive those lamps. These part can be purchased from Disassembly of the LCD display is required as well as some soldering.

Pelco 300 SERIES... | Answered on Dec 07, 2013

Not finding what you are looking for?
Pelco Logo

Family Lines

60 questions posted

Ask a Question

Usually answered in minutes!

Top Pelco Computers & Internet Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers


Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18403 Answers

Are you a Pelco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides