Peg Perego Baby Gear - Recent Questions, Troubleshooting & Support

6 screws and one bolt hold the steering wheel on. The screws are obvious but to get to the bolt you need to remove the cover, it is directly above the steering wheel adjustment button, just pop it off with a flat head screw driver. then you can easily open it up and see what broke, call customer service and get the replacement part. I assume your cable broke...mine did too. <!-- from fixya rte -->

Peg Perego... | Answered on Feb 06, 2019

Try Googling (Peg Perego)(model)(manual) without parens.

Peg Perego Baby... | Answered on May 05, 2018

Sounds like something is broken inside the handle. The button isn't catching. You could do a few things, quick fix, put a rubberband around the shaft just below the handle when it is extended and it will keep it up high. Better fix, contact Perego and get a replacement handle. If it has been doing this since you purchased it, it may be under warranty. If it is past the warranty period, you can either take the stroller to a Perego repair center near you or potentially replace the handle yourself. Perego customer service could direct you better there. You can email them in the US at: [email protected]

Peg Perego Pliko... | Answered on Apr 29, 2018

I have a PDF copy of the Mamas and Papas Freestyler manual Please post a message here with your email address and I can email it.

Peg Perego Baby... | Answered on Apr 04, 2018

You also have to pull on the middle part by the basket it has like a handle.

Peg Perego Pliko... | Answered on Sep 16, 2017

Peg Perego car seat is only compatible with peg perego strollers.
It is not clear from your very laconic question what you really need.

If you need to install a peg perego car seat on a peg perego stroller, then just look into the manual, OR, if you don't have one, search for it online.
In case you need to install a peg perego car seat onto any other stroller, I doubt a lot, it is possbile...
I am in an opposite situation.
I have got a peg perego stroller, but another type of the infant seat. After long searched online, we understood that once you buy a stroller, you almost always have to buy a car seat from the same company, or you won't be able to use it as a travel system (which is exactly how we are going to deal with the situation)

Peg Perego A3... | Answered on Sep 16, 2017

You will need to contact the manufacturer for parts on this.

Peg Perego Baby... | Answered on Nov 09, 2016

Lots of such wheels are held on by little hub caps.

The axle is generally a plain-ended round bar or pin onto which the wheel is placed followed by a single-use spring steel star grip cleverly disguised with an integrated chrome or plastic cover.

Careful prising with a screwdriver working around it can sometimes remove the clip fit for reuse - but not often.

They are a common retainer and repairers mostly keep a stock.

Peg Perego Pliko... | Answered on May 13, 2016

Yes you can replace it call perego at 1800-671-1701.

Peg Perego Pliko... | Answered on Apr 08, 2016

Not finding what you are looking for?
Peg Perego Logo

412 questions posted

Ask a Question

Usually answered in minutes!

Top Peg Perego Baby Gear Experts


Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18360 Answers

Vernon Taylor

Level 3 Expert

6531 Answers

Are you a Peg Perego Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides