Parrot GPS - Recent Questions, Troubleshooting & Support

you can download the full user guide from parrot.com/support.

There are parrot hands free manuals available at http://www.parrot.com/uk/support/userguides/#CK3100

The 3300 is not there but pairing seems to be pretty standard on all the parrot hands free kits. I'd try the CK3100 as it appears to be a very similar kit.

you will have to buy an integration harness to do it yourself. it might be cheeper to pay a professional to install it with out using a kit. Just make sure the shop you hire has installed 5-10 units already.

Most parrot codes are 1234, you may need to delete previous phones first before it will allow new ones.

Dan

you need to up-grade the software on your phone kit

usually software is inside the chip. On SD there're maps: you'd have to subscribe/buy a map subscription.

1234

once you scan for devices with the ign turned on a code will appear on the 9110 screen

the ign wire and the positive wire need to be switched around. on the parrot loom there is a red wire and a yellow wire with in line fuse holders, switch them around, ie red to yellow and yellow to red

you will need to do a software up-grade to erase the memory and re-pair your phone

it bepends on the software you have in the parrot, most probably you will need to up-grade the software to suit your phone

when pairing your blackberry, the phone asked to accept connection, just below this there is a small box saying (dont ask again) you must tick this for auto connection. hope this helps

your 3100 may need an up-grade, have you changed your phone lately? most common problem is that new phones have newer software versions and you need to up-grade the software on the parrot 3100 to suit

try 1234 or 0000

Parrot USA Support Try this link to get more details. Electro help

Hey everyone,I have had the same issue with my VW Polo Comfortline 2012, trying to connect the Parrot v5,25C to a iPhone 4S. I turned the ignition on and my phone Bluetooth together. I then hit the volume(-) button first then the volume(+) on the steering wheel, this has to be done in sequence - then + about 5/6 times. The car kit then said phone memory being erased and BOOM ready to pair again :-) Its all up and running now with the pass code 1234 entered on the phone for activation. I hope this helps!!