Panasonic Televison & Video - Popular Questions, Answers, Tips & Manuals
Panasonic TC-P50u50 went out. Is it the power supply or something else
Something short circuit in the SMPS [power] section circuit, and the pop you heard might be of a blow out fuse. It will be best to contact any service technician. If you wish to get some details; check the sites linked here.
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault. Search the site by type in the Brand Name of your set, in its search bar at the right side column, and press enter. See it in by Webview with mobile or by desktop. Mobile View has no search box. Screen-shots to defective LCD panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.
9/22/2021 8:07:50 PM •
26 views • 0 helpful votes
White dots when Panasonic plasma TV turns on disappear after warm up.
White spots or dots showing up on your TV's screen could be the result of a bad or damaged processor or due to some overheating occurring the summer time or cold weather temperatures during the winter time. TVs can be affected by electricity surges or spikes as electricity supplies vary throughout the year. Or power outages and brown outs and black out can also cause spots to be on the TV screen too.
6/29/2021 12:38:24 AM •
111 views • 0 helpful votes
Panasonic TV flashing LED
Buy a new TV this set most likely isn't worth fixing, plasma sets are much more complex than LED or LCD sets, also boards are hard to find and expensive
9/18/2021 2:19:28 PM •
18 views • 0 helpful votes
I NEED REMOTE CODES FOR A PANASONIC PLASMA 50 TV
FOLLOW THE BELLOW INSTRUCTION
- Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
- With the button lit, point the remote at the TV and enter the TV's 3, 4, or 5 digit code.
- Verify by pressing the VOLUME + button. ...
- Press the TV button to store the 3, 4, or 5 digit code.
7/2/2021 9:44:51 AM •
34 views • 0 helpful votes
I have panasonic tv model: th-l 32c20r. It does not power up.
Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the brand name of your set, in its search bar at the right side column, and press enter. See it in Webview by mobile. Mobile View has no search box.
6/27/2021 11:26:59 AM •
24 views • 1 helpful votes
Not finding what you are looking for?