Panasonic Logo

Panasonic Recent Questions, Troubleshooting Help & Support

  • 10K Products
  • 203K Answers
  • 4M Views

https://codesforuniversalremotes.com/panasonic-dvd-player-remote-control-codes/
How To Program A Samsung Remote To A DVD Player
  1. 1 - Turn your DVD player off.
  2. 2 - Press the Mode button on your remote to switch the remote to DVD mode. ...
  3. 3 - Press the Set button on the remote control.
  4. 4 - Enter the three digit DVD player code listed in your TV's user manual. ...
  5. 5 - Press the Power button on the remote control.
https://www.directutor.com/content/how-program-samsung-remote-dvd-player

Panasonic... | Answered on May 19, 2020


Here is the troubleshooting section of the guide. It points to several things for you to check.

https://www.manualslib.com/manual/119628/Panasonic-Sc-Vk680.html?page=34#manual

See no response when any button is pressed. Oddly, it might be condensation.

Panasonic Audio... | Answered on May 19, 2020


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.
View the site by desktop or webview on mobile devices to see the "search box". Type in the brand name of your set in search box; to get gathered the related posts.

Screen-shots to defective LCD panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.

Panasonic... | Answered on May 18, 2020


Generally I advise against the self repair of television sets as it always ends in tears and frustration.
https://www.ifixit.com/Answers/View/385126/light+flashes+10+times

SOLVED: The television will not turn on, power light blinks 10 ...

www.ifixit.com > Answers > View > The+television+will+not+turn+on...
26 answers
Jun 22, 2011 - This is what I get from the Panasonic 9th generation plasma: If any of the SUB or MAIN voltages that are highlighted on the DG Board is missing ... SOLVED: light flashes 10 times - PANASONIC TH ...
2 answers
Mar. 22, 2017
red light flashes 10 or 11 times doesn't come back on ...
4 answers
Oct. 5, 2013
Panasonic Viera blinking 10 times and do not turn on ...
3 answers
Oct. 6, 2017
SOLVED: Panasonic TC-P50S1 10 blinks? - Panasonic ...
3 answers
Oct. 29, 2016
More results from www.ifixit.com

I have a Panasonic TC-P42U2 plasma tv, and I am getting a ...

www.justanswer.com > ... > TV Problems > Plasma TV Problems
Dec 13, 2013 - The 10 blink code is the most general code that Panasonic uses, and it is only a starting point as to where to begin troubleshooting. To narrow it ...

TC-P42U2 panasonic 42" plasma, 10 blinks - Badcaps Forums

www.badcaps.net > forum > showthread
Oct 16, 2014 - To cut to the chase this set has the 10 blink code so I'm hoping that maybe I'll be able to fix it since boards seem to be scarce but this tv is only 4 ...

Panasonic... | Answered on May 16, 2020


Demonstration Mode
This is to enable you to experiment setting various
programs. (The letter D will always appear in the display
window. This is to confirm that there is no microwave
power produced and it is safe to use the oven without
any food). To set Demonstration Mode: press micro
power once, then press Stop/Cancel 4 times. To cancel
Demonstration Mode press Micro power once, then
press Stop/Cancel 4 times.

Panasonic... | Answered on May 11, 2020


Did you let the board dry out after it's journey by air and van to your home? They get damp from condensation and temperature changes.

This is my standard response to home television repair!

This explains why, and why you can't diagnose television problems on an online forum. The television sections are really only for help with manuals and remote codes.

Here are similar questions that we see often.
Question:

I've replaced everything in my television because it previously had a black screen with no lighting. Now it doesn't turn on at all and all I have is audio. What could be the cause ? Or

Turns on and sound works fine, but the picture is distorted (solarized? polarized? not sure what the term is) I replaced the main board, but that didn't fix it.
Or

I have an LG 55LM6200-UE with a dim lower-left. I just replaced both LED strips with no resolution. There is no physical obstruction visible, so this has to be a cable or board problem, right?
So your television stops working properly and you think it must be easy to fix, because you can buy boards on eBay, and you can watch YouTube videos. So you make a decision, you buy a board and you fit it, but the television still doesn't work as it should! This is a classic case of the 'let's try replacing this' method of television repair and illustrates why it is a bad idea. It doesn't work for a number of reasons. To correctly diagnose issues, you need to know every board, what it does and every component on the board. You need to know which part has failed, replace the component, or replace the board. The parts you purchased off eBay were probably out of scrapped sets and not tested. The part you put in was dead when you put it in, so you just moved on to another guess at what might be the cause and replace a board that is fine. And so it goes on, you change all the boards and it still doesn't work. Did you notice the large print that says 'NO Refunds, NO Returns'. This is to stop you sending your old one back and saying it didn't work, but the unscrupulous sellers use it as an excuse to get money for selling items that may, or may not work! The course to be a television engineer is 2 years full time education, take it to someone that knows how to diagnose and fix. It is by far the cheapest option. The part that failed might be a 20 cents fuse diode hard soldered to a board. They will charge you $5 in parts and a couple of hours labour. It's not the fix you want to hear, but it is the best advice.

Andrew - Fixya Moderator

Panasonic... | Answered on May 11, 2020


Don't worry all the Experts know that anything Panasonic KXTG is a phone with base unit. You were the one who posted it to the Panasonic Washing Machine Category.

I wouldn't say my answer was 'totally useless', you didn't understand my answer. I have elaborated on it with two further explanations. Either there is a Fax Machine trying to connect to you, or you have the volume turned up too high and you are getting 'feedback'.

Panasonic Lands... | Answered on May 11, 2020


Hold the "Power" button on the front of the player. After a few seconds, the display says "Reset"; let go of the button. When the "ON/Standby" button turns on, press the "Power" button to turn the player on.
https://www.techwalla.com/articles/how-to-reset-a-blu-ray-player-that-is-frozen
https://www.youtube.com/watch?v=TB6otbYFKRc



Panasonic... | Answered on May 07, 2020


Easy enough to replace, just 4 screw and a few plugs. however read this cautionary tale I wrote.

Yes, that never fixes the problem. This explains why, and why you can't diagnose television problems on an online forum. The television sections are really only for help with manuals and remote codes.

Here are similar questions that we see often.
Question:

I've replaced everything in my television because it previously had a black screen with no lighting. Now it doesn't turn on at all and all I have is audio. What could be the cause ? Or

Turns on and sound works fine, but the picture is distorted (solarized? polarized? not sure what the term is) I replaced the main board, but that didn't fix it.
Or

I have an LG 55LM6200-UE with a dim lower-left. I just replaced both LED strips with no resolution. There is no physical obstruction visible, so this has to be a cable or board problem, right?

So your television stops working properly and you think it must be easy to fix, because you can buy boards on eBay, and you can watch YouTube videos. So you make a decision, you buy a board and you fit it, but the television still doesn't work as it should! This is a classic case of the 'let's try replacing this' method of television repair and illustrates why it is a bad idea. It doesn't work for a number of reasons. To correctly diagnose issues, you need to know every board, what it does and every component on the board. You need to know which part has failed, replace the component, or replace the board. The parts you purchased off eBay were probably out of scrapped sets and not tested. The part you put in was dead when you put it in, so you just moved on to another guess at what might be the cause and replace a board that is fine. And so it goes on, you change all the boards and it still doesn't work. Did you notice the large print that says 'NO Refunds, NO Returns'. This is to stop you sending your old one back and saying it didn't work, but the unscrupulous sellers use it as an excuse to get money for selling items that may, or may not work! The course to be a television engineer is 2 years full time education, take it to someone that knows how to diagnose and fix. It is by far the cheapest option. The part that failed might be a 20 cents fuse diode hard soldered to a board. They will charge you $5 in parts and a couple of hours labour. It's not the fix you want to hear, but it is the best advice.

Andrew - Fixya Moderator

Panasonic... | Answered on May 07, 2020


i have a panasonic dvd-ls83 and it has region 4 on it i would like it multi region can you help, thanks

Panasonic... | Answered on May 07, 2020


Hi,
Please follow the steps : To change the player region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, * requested region code here (1-8) *, Subtitle, 1

3. Player will reset and requested region code will be set.
- For example to set region code to 3 press: "Enter, 6, >=10, <<, 00F2, Audio, 8, 3, Subtitle, 1"

To set the player to RCE proof region free
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 1, Subtitle, 4

3. Player will reset and set to "region-free" and "RCE-free" mode

To restore players factory region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 9, Subtitle, 1

3. Player will reset and set to factory region code

Regards, Jay__uji8

Panasonic... | Answered on May 07, 2020


https://www.panasonic.com/caribbean/support.html

http://www.csportal.panasonic-la.com/sys/cschat.html

Panasonic... | Answered on May 06, 2020

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Panasonic Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Cindy Wells

Level 3 Expert

6164 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Panasonic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...