Panasonic Logo

Panasonic Recent Questions, Troubleshooting Help & Support

  • 10K Products
  • 200K Answers
  • 4M Views

Hi i have penasonic vk90d after i service the unit . The unit is stuck on dvd but nothing works dvd tape fm aux nothing work the unit is stuck on dvd changer. Any body help me plz
[email protected]

Panasonic Audio... | Answered on Jul 04, 2020


Is the 265 connected via a TDA on the old IP ext card or the newer NCP or TDE if its on the TDE or NCP check the phones software may need to be upgraded, thats the only problem I have ever had with the KX-NT265 I now only use the newer KX-NT321 or NT343,346 etc

Panasonic IP... | Answered on Jul 03, 2020


Hey! Usually, DVDs have soem protections such as CSS and region code protection. These protections will prevent you copy dvds diretcly. In this case, you need DVD Copy software which can help you remove these DVD protection and copy DVDs freely. I have a good luck with this Wondershare DVD Copy which is easy to use and works fine. I recommend you have a free try at first.
Hope that helps.

Panasonic... | Answered on Jun 29, 2020


Sometimes, hitting "1" on your remote when it's loading bypasses the region sector and allows the movie to be played without functionality of menus. If that doesn't work you can either play it on your computer or search for software that'll put the movie onto your harddrive taking region block off and with the right knowhow back it up onto a dvd blank that'll work. Though if you aren't good with computers, the best way is to buy a cheap $20-$50 dvd player that can be remote programmed to be region free or buy your machine from any Chinatown store.

Panasonic... | Answered on Jun 29, 2020


Yes PDF, use DOCUMENT MANAGER software

Panasonic... | Answered on Jun 29, 2020


Every month I am earning online more than $8650 by doing a very simply online job from my home. By doing this in my part time I was able to save enough to buy me a new car in just a few months. This is so freaking easy that everyone should try it... Start making some dollars online today by following instructions on this website ==>>

HERE????? W­­w­­w.worknet8.c­­o­­m?

< Please do not copy (?) with url thanks ?? <

Panasonic... | Answered on Jun 29, 2020


Though the 4k Blu-ray player prototype is released in 2015 CES but there isn't that much information for the price and specific launch date we can get from Panasonic. And as I know, the 4K Blu-ray is supposed to come before 2015 Christmas. Too late, huh...
So let say the best for now is still watching a good movie with Macgo Blu-ray Player. By the way, it has updated to support 4K.

Panasonic... | Answered on Jun 24, 2020


Try pressing and holding the MUTE (CLEAR) button until the handset beeps. Then clear all incoming calls.

Panasonic... | Answered on Jun 23, 2020


Hi,
Please follow the steps : To change the player region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, * requested region code here (1-8) *, Subtitle, 1

3. Player will reset and requested region code will be set.
- For example to set region code to 3 press: "Enter, 6, >=10, <<, 00F2, Audio, 8, 3, Subtitle, 1"

To set the player to RCE proof region free
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 1, Subtitle, 4

3. Player will reset and set to "region-free" and "RCE-free" mode

To restore players factory region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 9, Subtitle, 1

3. Player will reset and set to factory region code

Regards, Jay__g6

Panasonic... | Answered on Jun 23, 2020


Hi,
Please follow the steps : To change the player region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, * requested region code here (1-8) *, Subtitle, 1

3. Player will reset and requested region code will be set.
- For example to set region code to 3 press: "Enter, 6, >=10, <<, 00F2, Audio, 8, 3, Subtitle, 1"

To set the player to RCE proof region free
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 1, Subtitle, 4

3. Player will reset and set to "region-free" and "RCE-free" mode

To restore players factory region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 9, Subtitle, 1

3. Player will reset and set to factory region code

Regards, Jay__okj4

Panasonic... | Answered on Jun 23, 2020


KX-TGA101S is an add-on handset for a Panasonic KX-TG1000 series cordless phone system. One of the models that is compatible with the handset is the KX-TG1032S. You can find the manual for the phone system on the product page here: https://shop.panasonic.com/support-only/KX-TG1032S.html . Assuming that you do not have voice mail from your telephone provider, you can change the number of rings from the Answering Device Settings Menu.

Start with the phone system in standby (no incoming or outgoing calls) mode. Press Menu and use the up/down keys to navigate to Answering Device. Press OK to enter the sub-menu. Navigate to Settings and press OK. Navigate to Ring Count and press OK. Use the up/down arrows to choose a new number of rings. Press OK to save and press Off to exit the menu system. Note: if the ring count is set to Toll Saver mode, the answering system will pick up on the second ring if there are new messages. It will pick up the incoming call on the fourth ring if there are no new messages.

See page 31 of the manual for the KX-TG1032 for this information. See page 23 for the way to navigate through the menu and a list of the menu tree items. The current link to the manual is ftp://ftp.panasonic.com/telephone/om/kx-tg1031_en_om.pdf .

I hope this helps.

Cindy Wells

Panasonic Lands... | Answered on Jun 22, 2020


Here are a few articles on Universal Remotes. Mostly, you'll have to try each one till you find the code that works best with your set.

Panasonic
- 1140, 1169, 1170, 1194, 1233, 1234, 1331, 1336, 1410, 1417, 1442, 1466

PANASONIC - 0171 0148 0054 0170 0062 0374 0381 0437 0950 0003 0070

https://codesforuniversalremotes.com/remote-control-codes-for-panasonic-tvs/

https://myuniversalremotecodes.com/remote-control-codes-for-panasonic-tv/

Panasonic TV Universal Remote Codes

1231, 1289, 1049, 1053, 1292, 1295, 1010, 1123, 1003, 1152, 1096

Panasonic HDTV Universal Remote Codes

1169, 1410, 1140, 1336, 1170, 1234, 1331, 1442, 1417, 1233, 1194

Panasonic... | Answered on Jun 18, 2020


  1. Insert the memory card in your navigation device.
  2. Switch on your navigation device and wait for it to start. ...
  3. Turn off your navigation device.
  4. Connect your memory card to your computer using a memory card reader.
  5. Install the latest application to the memory card. ...
  6. Install your map. [

Panasonic GPS | Answered on Jun 17, 2020


it comes on for itself when i turn off. it play for a minute then it cut off , takes two minute to come on

Panasonic HDD... | Answered on Jun 14, 2020


all you have to do is just hold the track button to the right for 10 sec and it will enter the code for you

Panasonic... | Answered on Jun 13, 2020


IPTV Free trial and IPTV Download guide: https://buyiviewhdiptv.blogspot.com/2019/03/iview-hd-iptv-free-trial-and-apk.html
I hope my answer will help you.

6be03805-c0f2-400c-8f07-22b5c1d024c4.jpg

Panasonic... | Answered on Jun 13, 2020

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Panasonic Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Cindy Wells

Level 3 Expert

6187 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Panasonic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...