Panasonic Computers & Internet - Recent Questions, Troubleshooting & Support

0helpful
1answer

How do I reset the bios Password on a Panasonic Cf-51

If you have forgotten your bios password on your Panasonic Cf-51, there is no need to worry. There are a few simple steps that you can follow in order to reset the password and regain access to your computer. First, locate the RTCRST jumper on the motherboard. This is usually located near the CMOS battery. Once you have located the jumper, remove it and then replace it in the opposite position. This will reset the bios password. Next, locate the power button on the front of the computer. Once you have located the power button, press and hold it for a few seconds. This will reset the power to the computer and will also clear the bios password. I hope this helps!
11/22/2022 4:46:24 PM • Panasonic... • Answered on Nov 22, 2022
0helpful
1answer

When I turn it on it just stays at booting up model cf-29 Panasonic computer

If your Panasonic computer model CF-29 just stays at booting up, there are a few things you can do to fix the problem. First, try resetting the computer by unplugging it from the power source and then plugging it back in. If that doesn't work, try holding down the power button for a few seconds to see if the computer will turn off. If the computer still won't turn off, you may need to remove the battery and then put it back in. If none of these solutions work, you may need to take the computer to a repair shop. I hope this helps!
11/22/2022 4:46:11 PM • Panasonic... • Answered on Nov 22, 2022
0helpful
1answer

Hi, my sister gave me her old Panasonic CF-w5, however she can't remember her Log-in password and she don't have the original disk, please help thank you.

If you have forgotten your password for your Panasonic CF-w5 and don't have the original reset disk, don't despair. There are a few ways that you can reset your password and get back into your account. First, try using a live Linux CD or USB drive. Many live Linux distributions come with a utility called "chntpw" which can be used to reset passwords on Windows machines. Once you have booted into your live Linux environment, open a terminal window and enter the following command: sudo chntpw -u <username> /media/windows/SAM Replace <username> with the username of the account you want to reset the password for. Once the command has been executed, you will be prompted to enter a new password for the account. I hope this helps! Here is the link:http://www.chntpw.com/download/
11/22/2022 4:45:42 PM • Panasonic... • Answered on Nov 22, 2022
0helpful
1answer

Panasonic KX-T7736 phone. 2 line system. 1 line is functioning correctly. the other line does not produce dial tone; when selected, I get a busy signal. This is not a new installation.

If you have a Panasonic KX-T7736 phone with one line not producing dial tone, there are a few possible causes. The first possibility is that the phone line itself is the problem. If you have another phone in the house, try plugging it into the same phone line and see if you get a dial tone. If you do, then the problem is with the KX-T7736 and not the phone line. The second possibility is that the problem is with the phone's internal wiring. To check this, unplug the phone from the wall jack and plug it into a different jack. If you get a dial tone, then the problem is with the first jack and not the phone. The third possibility is that the problem is with the phone itself. If you've tried the other two solutions and you still don't have a dial tone, then the problem is most likely with the KX-T7736 and you'll need to contact Panasonic for assistance. I hope this helps!
11/22/2022 4:45:19 PM • Panasonic... • Answered on Nov 22, 2022
0helpful
1answer

I have a PANASONIC CF-RZ4 with supervisor password. Does anyone have fresh copy of BIOS.

What to do if you have a Panasonic CF-RZ4 with a supervisor password If you have forgotten your supervisor's password for your Panasonic CF-RZ4, you will need to reset it in order to gain access to the BIOS settings. In order to do this, you will need to have a fresh copy of the BIOS file for your CF-RZ4. You can usually find this on the manufacturer's website. Once you have the BIOS file, you will need to use a program like 7-Zip to extract the contents of the file. Inside the extracted folder, you will find a file called "bios.bin". This is the file you will need to use to reset your supervisor's password. To reset the password, you will need to boot into the BIOS settings. To do this, you will need to press the F2 key when the CF-RZ4 logo appears on the screen. I hope this helps!
11/22/2022 4:42:28 PM • Panasonic... • Answered on Nov 22, 2022
0helpful
1answer

Cant find panasonic nx vx77 movie camera record button

The record button on your Panasonic NX VX77 movie camera is likely located on the top of the camera, near the shutter button. If you can't find it there, try looking on the back of the camera, near the LCD screen. The built-in microphone is likely located on the top of the camera, near the record button I hope this helps.
11/22/2022 10:41:58 AM • Panasonic... • Answered on Nov 22, 2022
0helpful
1answer

Panasonic kxT7433 how to change a password on extension

Hi, Please factory reset your device before attempting to change the panasonic password. This will remove the password and any other data on the phone. If this extension is associated with voicemail, you would want to call the voice mail first and then listen for options to change password. Otherwise, please refer to the product manual's table of contents. Thank you.
10/28/2022 8:59:52 PM • Panasonic... • Answered on Oct 28, 2022
0helpful
1answer

I need instructions for a Panasonic VCR NV-3D3

https://help.panasonic.ca/english/support/operatinginstructions/q.asp
10/28/2022 1:39:34 AM • Panasonic... • Answered on Oct 28, 2022
0helpful
1answer

Technics SX-KN2000 keyboard ; Sequencer. Hi how can I reset my Technics KN2000.

There is information in the link https://www.google.com/search?q=technics+kn2000+factory+reset It may have an internal battery that has failed and needs replacing. These batteries ensure things happen when turned off like retaining or clearing memory. ..
10/28/2022 1:23:55 AM • Panasonic... • Answered on Oct 28, 2022
0helpful
1answer
0helpful
1answer

Red alarm light on Panasonic KX-TAW848 PBX after power surge

Hi, Please use your manual to factory reset your phone and then use the manual to set the phone up as you initially did in order to overcome this issue. Thank you.
9/25/2022 4:31:34 PM • Panasonic Analog... • Answered on Sep 25, 2022
0helpful
1answer

Panasonic toughbook cf-54 has password and usb not boot need password removed. cmos battery removal does not work.

only Panasonic.com can clear BIOS admin PW.. not legal here.
8/25/2022 12:23:08 PM • Panasonic... • Answered on Aug 25, 2022
0helpful
1answer

Repair manual for Panasonic MX-J 220V BLENDER

goggle for itor ask at Panasonic web site
8/14/2022 6:47:17 PM • Panasonic... • Answered on Aug 14, 2022
0helpful
1answer

My panasonic plasma tv model TC-P58V10 is won't tunrning on. the red light indecator is always blink.....can you help to fix this!

1. Open Panasonic TV 2. look through the power board and motherboard for bloated capacitors 3. if any bloated capacitor is found change it with a new genuine capacitor 4. fix it back with the screws and turn it on
8/13/2022 3:32:58 PM • Panasonic... • Answered on Aug 13, 2022
0helpful
1answer

Panasonic SA-AK280 suddenly stopped working

Hi, Please make sure that you've removed all of the discs, pressed the power button and Disconnect the AC mains lead before attempting to power on again. Thank you.
7/28/2022 7:52:08 PM • Panasonic... • Answered on Jul 28, 2022
0helpful
1answer

How to print alphabetic letters on panasonic cordless phone

you repeatedly press the key and it will move to next letter
7/8/2022 1:45:56 PM • Panasonic... • Answered on Jul 08, 2022
0helpful
1answer

I have a firmware for WJ-HD316 but do not know how to update for it. I tried to check in setup menue (Maintenance) without any item for firmware update. Please help me.

A little late. Just found this post while looking for firmware for the wj-hd316 Just type this in yer browser, as long as you are the same network . "your_ip/cgi-bin/update.cgi" So have your firmware and admin un/pw ready and you should be all set Good luck But since I'm here. Anyone seen the wj-hd316 firmware around? Mine is IPL:V2.04 / SYSTEM:V3.17 CHKSUM: 4A37 Thanks
6/30/2022 4:01:59 PM • Panasonic... • Answered on Jun 30, 2022
0helpful
1answer

Panasonic Scanner Service Utility?

model number of scanner ? suggest looking in panasonic support for software https://panasonic.net/cns/pcc/support/scanner/download.html
3/5/2022 8:01:50 PM • Panasonic... • Answered on Mar 05, 2022
0helpful
1answer

Cannot open and close cd tray Panasonic SA-PM42DB

Try replacing the ejection pin on the device that is responsible for retracting the disk bay.
11/29/2021 12:42:14 PM • Panasonic... • Answered on Nov 29, 2021
0helpful
2answers

A voicemail box we can not access. An employee left and we need to reset the voicemail.

Follow the programming menu to delete the user/extn
10/28/2021 6:59:37 PM • Panasonic KX... • Answered on Oct 28, 2021
Not finding what you are looking for?
Panasonic Logo

2,227 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Computers & Internet Experts

Muzahura Frank

Level 3 Expert

2071 Answers

Cindy Wells

Level 3 Expert

6553 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you a Panasonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...