Panasonic VDR - Recent Questions, Troubleshooting & Support - Page 7

I have the same problem and really need an answer, anyone?

When i have had that happen to a customer i have had to replace the dvd drive assy to take of the problem. Your videos on your disc should still be retieveable once the drive has been replaced, also ask for any firmware updates for your drive assy. I hope this helps

If you have data cable given to the camcorder connect it with the camcorder and the other end to the usb of pc.Then computer can detect the device ,import files to the computer.Install your camcorder driver before plugging data cable

cnontact panasonic they might be able to send you one (paid offcourse)

Hello Dear lofbersj

#1
Insert your ( memory card , flash disk , cellphone , .... ) into your computer.
#2
Open up 'My Computer'. You should see it under the list of available drives.
#3
Check its contents first to make sure that you have the right drive.
#4
In 'My Computer', right-click on the drive and choose 'Format'.
#5
Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place.
#6
Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.

1. Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com
   
2. 2 Open up 'My Computer'. You should see it under the list of available drives.
   
3. 3 Check its contents first to make sure that you have the right drive.
   
4. 4 In 'My Computer', right-click on the drive and choose 'Format'.
   
5. 5 Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place.
   
6. 6 Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.
   

Camcorder wont finalize disc on battery power, it will finalize disc with powering it by ac adapter/ charger.

In order for you to install the software to your computer running Windows Vista is to download the compatible software from this link and install it to your computer.

http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/DVD-Camcorders/Drivers-Downloads/model.VDR-D300.D#ts

you cant put the information on with the ac adapter which is behind the battery with 7.9v so u will need ur ac adpater while u are loading or it will not connect and thats what usb mode means. if you dont understand atleast phone the panasonic helpline because they have just helped me.
thanks.

Hi Asmahesh2003,

The possible reason why your camcorder is not working is due to theVoltage outage.
The voltage required for Laptop is much more than required for the camcorder to operate. So, when your Nephew connected the adapter to camcorder, Voltage supplied was much more than required which has destroyed some internal part of the camcorder.

Thanks for using Fixya.
Good luck and have a nice day.

Hi I have lost my Driver for Panasonic VDR-D160 model so someone have for that driver please send to my mail [email protected] or [email protected] thank you

can you hear a rattle when you shake the unit? Listen carefully!There is a screw that comes off and creates this problem. Can be fixed by the service centre as you have to open the system.

Well if you cannot remove DVd to your PC then your going to have transfer the movie by cable, this is mostly by a USB or Firewire cable.
Software will be needed, but Windows Vista and others have that built-in anyway these days.

Hi,
I need bit details about your Panasonic VDR-D150 camcorder problem as you said it does not play disc and play other discs?
Please explain its problem in bit details to diagnose problem.
Thanks.

All right, the following section will show you the best way to help you with the conversion.
Download:
1. Download, install and launch Video Download Studio from http://www.downloadvideos-convert.com/download-videos-music.
2. Click” add URL” button to paste the URL of the video you want to
download. ( or you can play the video on dailymotion and click “auto capture”, Video Download Studio will automatically capture and download the video for you.)
3. Download details will showed on the working window.
Convert:
1. Click” convert” button on the top, you will switch to convert interface.
2. Click ”add” button to load your videos to Video Download Studio
3. Click” profile” drop-down list to select MP3 format.
4. Click” convert” button on the bottom, you will get MP3 format video in seconds.
As you can see, these simplest steps enable you to convert video. Join in and do it yourself, you will get a lot of fun.get it from http://www.downloadvideos-convert.com/download-videos-music

If you check your manual you will see that it fits to the battery.

The cord connects from the back of the battery charger See the picture

please rate my help++++Thanks for using FIXYA

I am under the impression that your computer has a PAL video capture card. Being a laptop, it is probably built in to the mother board.

What your computer requires is an NTSC video capture card that can also handle audio as like the PAL one that is in the computer.

I would suggest you go out and get a USB type NTSC video/audio capture card. After loading the drivers and software for the new card, it should be able to accomplish your task.


Jerry G.

Hi!

As for MOST cameras/camcorders today, no special drivers are needed. Windows native drivers will do the job.

I guess what you're looking for is a video editing software.
If that's so, please specify the name of the actual software you need, or maybe I could recommend on some good replacements, that will meet your requirements...

Waiting for your reply,
Pelu.

dont you have to finalise the disc?