Panasonic Palmcorder - Recent Questions, Troubleshooting & Support
Panasonic SDR-H18 Camcorder - I would like to
Did you ever figure out how to do this? I have misplaced the cord to transfer files from the HD to the computer, and I would like to not have to purchase one through Panasonic (Best Buy didn't have one). I just want to transfer the files from the HD to the SD card while in the camera, and then take the card out and put it in the Mac. Any luck?
8/14/2021 10:41:46 PM •
on Aug 14, 2021
Push the reset button
This error indicates a cassette mechanism malfunction.
It happens usually when you don't operate the camecorder for long time
leaving the cassette inside and the battery attached.
1. Open the cassette housing and nock GENTLY with your finger tip
on the cassette cabinet (particularly on the position marked "push") until
the cassette is released.
2. Push on the right place (marked "push") to close and then close the
3. Operate the cassette (play, fast forward/backward).
Repeat the above steps several times until the problem is gone.
Advise: Remove the battery and cassette when leaving the camecorder
for long period without being operated, and store the camcorder in a
dust/humidity protected place.
Hope this can help.
12/21/2020 3:57:01 AM •
on Dec 21, 2020
Blinking power light
call panasonic if there are that many posts maybe it is a recall issue and they should know about it.
10/3/2017 3:51:05 PM •
on Oct 03, 2017
Since we do not know where you are, we can offer no advice as to where you could go for repairs. Sorry.
9/22/2017 1:02:58 PM •
on Sep 22, 2017
Not finding what you are looking for?