Palm Zire - Answered Questions & Fixed Issues

You can try to leave it for a few hours then charge it again. Or you can replace the batteries. I also have the same problem but after the reset, everything worked fine

Generally this error means that HotSync manager (via the 4 Outlook conduits) is having a hard time connecting to your Outlook or, in some cases, specifically to your Oultook profile.

https://www.ifixit.com/Guide/Palm+Zire+m150+Battery+Replacement/56555

I have the same problem and discovered that the right side of the screen had "spread". When I draw a line from the left to the right using Note Pad, the line ends up about 1/4 inch above the stylus. What I had to do is touch the stylus about 1/8th of an inch above the center of the digitizer target on the right side.

Sounds like a bad battery

HP, Palm's new owner, has offered Palm Support Palm Tungsten E2 Palm Desktop 6 2 and HotSync Manager... to help sync PDAs to Win 7. However it lists the z22, which used Palm OS 5.4, rather than the m150, which used Palm OS 4.1. I don't know if that will provide a barrier, but good luck in your attempt.

You find a fix to that problem, and the (Palm) world will beat a path to your door. HP, Palm's new owner, has attempted a fix for Win7, but Win8/8.1 may become the impossible hurdle. Good luck!

If you have not already done so, you need to install palm desktop software, install and turn on hotsync and install the usb driver for your device.

No, only if you synchronized with another device beforehand. Using Palm Desktop, eg, you could synchronize and get the list back.

This "question" is a feeble attempt at spam. But I thank you for the easy points.

Ok,Download software for recover your data from Memory Card, Phone, HDD or any other Storage Device ----
Download from the following link ------

http://www.dasofts.com/software/3675-recover-my-files-3.98-build-6218.html


Note- this software is works only with windows operating system so, connect your Memory Card, Phone, HDD or any other Storage Device to computer to recover data.



For any other help contact me.



Thanks

u need to refix that rubber.......

Check and see if you can download a "mediaimpressions" driver. I have found it is great for downloading photos from any device. GOOD LUCK

Try doing a soft reset on the pda, this will usually resolve the issue. Then reperform the aliginment task.

Welcome to Fixya

Sounds like the problem is the LCd screen already. Have you tried doing a hard reset to your palm? The data in your palm can only be transferred using Hotsync. Try uninstall/install the software again to the new computer. May i know the Windows OS of the new computer and what is the model of your Palm.

Thank you for using FIxya! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

the screen says use stylus to tap center of target ...i do that and it goes to upper left corner i tap and it goes lower right corner and back and forth between the to corners?

You could try

operatingguides.com

if you need a user manual
or

servicemanuals.co.uk

if you want the schematics etc

We've used them in the past and found them very good.

Also if it is not listed then ask via the link and they
will probably be able to get it for you.

You need to reinstall the software.