Palm III - Recent Questions, Troubleshooting & Support


You can get a compatible palm desktop software and install it. it will let you sync again. you can get the palm desktop software from link below http://kb.palm.com/wps/portal/kb/common/article/33529_en.html

Palm III | Answered on Aug 24, 2009


You did it right, but are you sure the new batteries are fresh, and they are inserted correctly?

Double check. It is really easy to put the batteries in wrong if you haven't used the device in a while. And batteries can be bad, even if newly purchased.

If the Palm was working the last time you used it, being inactive wouldn't kill it. If the batteries that were in it all this time leaked, The leaking chemicals could damage the unit. But that would be pretty obvious when you took the old batteries out.

Once the batteries run down to zero, you would lose any data that was stored in in the. You would have to re-load it from a backup. Even so, it would boot up and take you to the setup screens when you turn it on with working batteries.

Make sure the batteries are OK. Sometimes, even brand new ones are defective.

Palm III | Answered on Jun 29, 2009


Go to your outlook profile on your pc and find out what changed or the files will end up in two profiles. Depending on how much memory you have left........

Palm III | Answered on Jan 02, 2009


One Word
DONT!!!!!!!!!!!!!!!!!!!!
Palm can't think that fast.......especially with 3rd party!!!

Palm III | Answered on Jan 02, 2009


I think on that model there's a touch icon in the left bottom corner, if you tap there it opens the brightness feature. If not it's in the Preferences.

Palm III | Answered on Apr 07, 2008


Try setting the HotSync system to "do nothing" with Date Book and use another calendar program.

Palm III | Answered on Mar 10, 2008


I love TCPMP. It plays anything I could through at it. Go to http://picard.exceed.hu/tcpmp/test/ and download click the tcpmp.palmos.0.72RC1.zip link. You will also need the additional plugins. I recommend at least ffmpeg (video decoder for just about everything).
The project has been discontinued and will be rereleased as BetaPlayer, but there isn't much information about that project yet. But for now, TCPMP is the best solution on the Palm TX.

Palm TX Handheld | Answered on Jun 28, 2019


You can try to leave it for a few hours then charge it again. Or you can replace the batteries. I also have the same problem but after the reset, everything worked fine

Palm Zire 71... | Answered on May 08, 2019


Hi AnyMoose:
I list 3 ways to fix the touch screen on a Z22. People on fixya list a credit card method. 4 ways to get the screen working. More tips and maintenance at:

http://kidbots.com/WEBADD/Z22_PALM_PILOT/Z22_PALM_PILOT.html

good luck

robin dusty graves

.

Palm Z22... | Answered on Jan 28, 2019


Hello ariuz1953
Your solution is to simply Factory Reset the Z22, and put in your own new name and password. I have most answers to all Z22 questions. see:
http://kidbots.com/WEBADD/Z22_PALM_PILOT/Z22_PALM_PILOT.html
good luck
robin dusty graves

Palm Z22... | Answered on Jan 28, 2019


Hello AnyMoose
I am guessing that 6 years ago, when you posted your "QUESTION", you upgraded your Windows to Operating System to a newer version that is not supported. I cover a number of solutons to the problem at:
http://kidbots.com/WEBADD/Z22_PALM_PILOT/Z22_PALM_PILOT.html
It is rare to find anyone still using a Z22 these days. ( I use mine every day)
good luck
robin dusty graves

.

Palm Z22... | Answered on Jan 28, 2019


Hi, erieser,
If your new ( used) Z22 has a name "missy", then it is NOT A "BLANK", as you state! You need to do a complete "factory Reset" After the COMPLETE factory reset, you then start the Z22 and name it Absolutely identical to your computer's Z22 name, and then try again to connect. I am surprised that fixya.com did not direct you to my 32 other Z22 answers, which cover your question. You can read about your answer and other tips and maintenance procedures at
http://kidbots.com/WEBADD/Z22_PALM_PILOT/Z22_PALM_PILOT.html

good luck
robin dusty graves

Palm Z22... | Answered on Jan 28, 2019


Replace it.

Palm Z22... | Answered on Jan 28, 2019


Generally this error means that HotSync manager (via the 4 Outlook conduits) is having a hard time connecting to your Outlook or, in some cases, specifically to your Oultook profile.

Palm Zire 31... | Answered on Nov 15, 2018


you need to run a inbox repair tool.

Make sure you close outlook

Start > My computer > Tools > Folder options > General tab click on show hidden files and folders > Apply ok

Go to the follow wing location to find scanpst.exe
if you are using Outlook 2007
C:\Program Files\Microsoft Office\Office12
If you using Outlook 2003
C:\Program Files\Microsoft Office\Office11

Double click on SCANPST.EXE
Click on browse go to following locaiton where your pst file as been save
C:\Documents and Settings\Robyn M. Drothler\Local Settings\Application Data\Microsoft\Outlook\outlook.pst

Click on start > then click on repair

Palm Treo 600... | Answered on Nov 01, 2018

Not finding what you are looking for?

-2 questions posted

Ask a Question

Usually answered in minutes!

Top Palm Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

gary433

Level 2 Expert

253 Answers

Are you a Palm Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Palm Computers & Internet

  • Forum

View Most Popular

  • Palm Computers & Internet
Loading...