Definition of Static and Dynamic Calibration
diesel injector pumps that are bench tested for flow volume are defined as static tested , injector pumps on engine that are flow/timed tested are considered dynamic tested , there will be slight differnences in both (volume) , but the latter method should allways be the prefered method to test a repair pump , and final adjustmets should be made after a sample of exaust gas is tested for co2 % for proper emmisions
What could be causing the fuel injectors not working on a 1989 Volkswagen Jetta?
Highly unlikely the are plugged..they are electricly activated along with the cylinder spark..the best us to get a code read on your car..if will show you exactly why they are not activating..as for the gas at the head..the fuel pump precharges them for a second or so before sending the spark message..so they are under pressure after you turn your key..to test this just turn your key without going to start and listen for the pump running a few seconds...if not it may be the pump..good luck..
How to change from Analog to digital
By the time you where done with that one, you would be better off getting a new or used, digital meter. You would have to just about rebuild it.
Resetting codes
Take cables off of battery, and touch them together for 20 seconds then place back on to battery.
6/11/2014 7:22:08 PM •
Otc Tools...
•
Answered
on Jun 11, 2014
Not finding what you are looking for?