Oritron Audio Players & Recorders - Recent Questions, Troubleshooting & Support

Radio Shack and Tv repair shops normally carry a variety of power cords.

Hi.

It sounds like the drive belt for the player has either worn out, or has become broken.

The only way to find that out for sure is to take the player apart.

If the belt is worn out, it will be loose fitting, and obviously, if it is broken, it will just be laying there.

To take the player apart, turn the boombox around so that you are looking at the back.

There will be screws in the corners of the boombox, you will need to remove ALL of them in order to open the casing.

There may also be a screw or two inside the battery cmpartment, those will need to be removed as well, if there are any.

After removing the screws, the case should slide apart, but there may be retaining tabs that hold the boombox together as well.

The belt will be located at the front bottom of the boombox.

Once you get it apart, you should see it pretty easily.

Replacing it is pretty simple, you just remove the old one, and put the new one back over the capstan rollers and drive gear.

You will see how it goes on when you take the old one off.

Once you get it on, put the screws back into the case in the same order that you took them out.

This should get your tape player back up and going again.

Oh, you can go and use a rubber band if you don't have a replacement drive belt for it, just get a rubber band that fits good and tight when you put it on.

I hope this works out for you, good luck, and have a good day !

Hi stretchb,
I've tried to look in my link to get the exact replacement belt of your model but it was not available. You may try this replacement belt for your cassette.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.

I don't have a solution, but I hope you at least got a response from Fixya, because I have sent several requests about the same problem never got any response. Either they don't care or don't know. [email protected]

I have boombox op 1011 and can't get play button to work for cd's

Whether your unit has a jack for headphone or not I don't know. But if it has sockets for line out it can be of some help. Line out sockets provide the output from preamplifier section and in many conventional audio systems the same is the substitute for driving headphones. So you can try connecting your headphones to the line out sockets using an adaptor pin.
NB-The preamplifier of all audio systems are not able to drive headphones. Only some can. But if you introduce a headphone amplifier between the line out sockets and your headphone it will SURELY work.

contact partstore.com they might be able to help you with a manual and remote for your set good luck.

All questions need clear 'make model (what it is)' first 3 words. https://www.google.com/search?q=fmdott085+V398 ..

Question edited for clarity, typo and CAPS. Question moved from Cars and Trucks category. Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries. How long is the warranty on AfterShokz? While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase. Jan 11, 2019

How To File A Warranty Claim For Your SHOKZ Headphones

https://www.google.com/search?q=Openfit+Shokz+battery+replacement ..

Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first. But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.

The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.

I have the same model with the 8 track player, original manual, and original receipt dated 1975.

Probably nowhere as this is an Amazon / eBay special so made in China. You should be able to go to Windows Settings, - Hardware and tell Winderz to find a compatible driver. https://www.google.com/search?q=VIBE+SOUND+USB+Turntable+Model+VS-2001-USBT+drivers ..

Hi I have a manual (and an IQ Voice organizer that I'm trying to sell). I would happily send you a pdf file of the manual if you contact me. Robert

Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour. Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min. How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .

Questions edited for clarity, full 'make model (what it is)'.Spray the buttons with Electrical Switch Cleaning Fluid Spray. It is an old unit and the contacts are probably dry.https://www.google.com/search?q=CR-06PL..