Orion Televison & Video - Popular Questions, Answers, Tips & Manuals

I think you are confused. this is a very standard cheap LED HD television. Televisions don't connect to computers. If the television has a USB socket it is for technicians to do software upgrades manually using a USB Memory Stick. https://www.google.com/search?q=ORION+TV+SLED2468W ..

It seems unlikely. Various help in the link. https://www.google.com/search?q=mini+geeni+with+wifi+camera+connect+to+television ..

It is not possible to directly connect a Wi-Fi Geeni camera to an Orion TV model number TVDVD092. The Orion TV model you have mentioned is a television set that is not capable of connecting to a Wi-Fi network or functioning as a Wi-Fi network device. In order to use a Wi-Fi Geeni camera, you would need a device that is capable of connecting to a Wi-Fi network, such as a smartphone, tablet, or computer. You can then use the Geeni app on that device to set up and control the camera.

It's possible to connect a Wi-Fi security camera to a TV, but whether or not it will work with your specific TV model will depend on the capabilities of the TV and the camera. In general, most modern TVs have built-in Wi-Fi connectivity and support for applications like Netflix and Hulu, which allow you to stream video from the internet directly to your TV. However, not all TVs support all types of Wi-Fi cameras, and some cameras may require additional hardware or software in order to be used with a TV. In order to connect a Wi-Fi security camera to your TV, you will need to check the specifications and compatibility of both the camera and the TV. If your TV has built-in Wi-Fi and support for streaming applications, it may be possible to connect the camera directly to the TV using the Wi-Fi network. Alternatively, you may be able to connect the camera to a computer or mobile device and then use an HDMI cable to connect the computer or mobile device to the TV. In summary, it's possible to connect a Wi-Fi security camera to a TV, but whether or not it will work with your specific TV model will depend on the capabilities of the TV and the camera. It's best to check the specifications and compatibility of both the camera and the TV in order to determine the best way to connect them.

This says you can, but I don't believe it is possible. All televisions need a remote and they are freely available if you Google make model replacement remote You will get a facsimile remote, which is an exact copy of the original.

How to Program an Orion TV Without a Remote - eHow UK

https://www.ehow.co.uk > how_7339207_program-ori... Scroll through the menu choices using the "CHANNEL UP" and "CHANNEL DOWN" buttons. Choose "Picture," "Audio," "Channel," "Lock" or "Setup" from the menu. The " ... ..

https://www.replacementremotes.com/orion/vp0060-vcr

There are composite to RF modulators that can be used to connect the DVD player to the TV. This, https://www.amazon.com/CIMPLE-CO-Composite-Converter-Modulator/dp/B06XC9Y3VB , is one example. If you want to switch between antenna (or ATSC converter box RF output) and the DVD player, you might need an A/B antenna switch with some modulator models. I hope this helps. Cindy Wells

well tv repair shops might have the answer

Use code search on your GE URC to find something that works. If a search through all codes stored in the URC fails, try a different one.

Search the internet to find a supplier.

Let me sent you 2 sites that may help. Free User Manuals and Owners Guides ManualsOnline com ManualsLib Makes it easy to find manuals online

Yes they all came with remotes unless it is an ancient top loader.

This is not really a question. Please rephrase it and be specific. Please keep in mind that some of us answering your question has never come in contact with your product- we answer off intelligence however it is far more difficult to answer your questions when we have to figure out accompanying information on our own. Normally sets that allow multi screen (putting together multiple sets to make one big tv) use some type of splitter (cdmi) and then each tv needs to be set to the position it will be in etc. the remote recover is a another story and mostly depends on preference. Do a little research and find out whats needed to get what you need, and we will help you along, but please be specific about what you need and want and the steps you have taken. good luck https://www.6ya.com/mrmmike

Free manual for similar model tv: http://media.datatail.com/docs/manual/145371_en.pdf http://media.datatail.com/docs/manual/145371_en.pdf

https://www.howtomendit.com/answers.php?id=73308 Besides trying the upside down approach, try Sharon's tip at the very bottom of the link. Quoting: "I just had a tape stuck in a VCR/TV combo so went on the Internet for help and all other answers were to take the top off the VCR which of course is not possible with a tv combo. While stuck the the power would turn on it would just emit a low moan-whining noise for a few seconds starting strong then running down and then power off. Couldn't watch TV in that state, it would automatically power off. So I got down comfortable on the floor eye level with the input slot with the flapping door cover and pressed the power button then quickly with my fingers of one hand inserted them in the tape load slot and using my middle fingers continously began pushing up on the top edge of the cassette in a stiff but quick flicking motion over and over again (like trying to physically force the tape up with intermittent prodding short and quick strokes so it could clear the lip if the eject mechanism kicked in) while simultaneously pressing and holding the eject button with my other hand and after a few tries and 5 or six upward prods on the front top edge of the cassette the eject mechanism activated and spit out the tape. Sharon June 2007"

It will be marked input or video.

Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. In some cases, the remote control might need to clean. https://electronicshelponline.blogspot.com/ https://homenol.blogspot.com/ https://remotesearch.blogspot.com/ Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly. https://youtu.be/wUpnETSm6_k https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean] https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]/

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main digital board./

PUT YOUR "SPECIFIC" MODEL NUMBER HERE!