Oregon Scientific Measuring Tools & Sensors - Answered Questions & Fixed Issues

i have the LL.L error in my sensor, i noticed it was disconnected, i soldered the foot and now it works.

here you go a manual http://global.oregonscientific.com/manual/BAR686A.pdf

http://www.oregonscientificstore.com/t-user-manuals.aspx

I assume it is a wireless station. If so, there is a procedure to go through to get the temperature sender and the base station to sync up and work. You need to check your owners manual to get the exact procedure for your unit. On my station, I have to remove the battery from the base station, let it power up and within 5 minutes, install the battery in the remote station(s) (temperature, rain gauge, wind gauge, etc.). Also, you must keep the remote station within a certain range for the base to get a good signal. Probably 25 feet, but the owners manual will have the right number. Also, use new batteries.

Use a volt meter to see if the battery is depleted or not. If you replace the battery and the alarm stops then it was a weak battery, If it keeps on then there something setting it off. You can use the information in the owners manual Oregon Scientific BAR629HGU Manuals to troubleshoot it.

You need to set up the correct time zone offset. For example, CST is -6; EST is -5. If daylight savings is active, time will be: CDT = -5; EDT = -4. CST = Central Standard Time EST = Eastern Standard Time CDT = Central Daylight Time and so on. The Official NIST US Time

It takes a few days before the unit will forecast. It has to collect the weather conditions for a period of time, in order to make a forecast (the barometric pressure, mainly).

As much as it sucks to do, you have to reset the base and the temperature sensor. When you do it, keep the temp sensor next to the base until the base recognizes it.

http://www.oregonscientific.com/wcsstore/IDTStorefrontAssetStore/File/WR602.pdf

You are not clear on what your question is but the graph show's you hourly the drop or rise of barometric pressure

I believe the wind sensor is a rotating cuff that has a wire which needs to input into the main reader or the wifi unit.if it's the wifi unit you need to check the receiver is picking up the signal.if it's the main readout then check the connection.if it is wireless, you may find a switch on the transmitter to change channel.this may fix the problem, especially if the receiver is near other wireless or bluetooth equipment.

Heavens Kaitlan you don't ask much do you? I think you need to spend a happy hour or two online with each question, unless there's a Professor of Climatology reading this.

You have to switch C/F to F and then insert batteries :)

You think this is something for you? http://www.trekkinn.com/images/pdf/manuales/eng_oregon-scientific_manu_10787.pdf

You may view the manual at http://personalcare.manualsonline.com/manuals/mfg/oregon_scientific/rar188abk.html

I have the same problem and would also like an answer to this

There is a reset button on each sensor unit and there is a reset on the base display. The NA means that the signal is not being sensed from the remote. If you use the reset button on the base you will lose all the historical data. The problem may be related to strong interference from something else nearby, You can bring the sensor inside to see if the base picks it up. IF it does not it may need to be replaced. I have dealt with Oregon Scientific before and they are very good with their support. http://www.oregonscientificstore.com/WMR86A-Oregon-Scientific-Backyard-Pro-Wireless-Weather-Station.product

I had the same problem, Since the outside temp wouldn't read, I figured it was the outside unit batteries. Went through half a dozen AAA batteries and wouldn't read. It was the indoor unit. Had the same bats I installed 3 years ago. DUH! Replaced the AAA, and all was well. When the inside batteries die out, it has just enough juice to read indoor temp, but not enought to sense exterior signal.

Check batteries in outdoor unit and try moving to closer to the base station.

We are having the same problem