Onkyo Audio Players & Recorders - Answered Questions & Fixed Issues


Its fault in the AUX cable that cable which is connected to the speaker system.

Onkyo Audio... | Answered on Jun 18, 2020 | 20 views


Hello, To test the subwoofer when the blue light is on if you apply your thumb to the end of the subwoofer cable (the end that you would plug into the receiver) there should be feedback from the sub. If there is no feedback then the sub is not working correctly. Thanks, FJD

Onkyo Audio... | Answered on May 13, 2020 | 1,960 views


DTS-HDMA and Dolby TrueHD cannot be passed to your receiver via bitstream on the PS3. DTS-HDMA cannot be decoded either so you're out of luck there.
Dolby TrueHD can be decoded internally on the PS3 assuming your firmware is up to date. Set the Blu-ray HDMI output to PCM and you can then pass it to your receiver.
If this doesnt work, do a system update on your PS3.

Onkyo TX-SR606... | Answered on May 07, 2020 | 903 views


The output stage has been damaged. Time to repair it at an Onkyo service department.

Onkyo Audio... | Answered on Apr 30, 2020 | 51 views


https://chilker.com/product-category/saree/

Onkyo Audio... | Answered on Mar 31, 2020 | 78 views


If you want to DIY, send an email to me at . This email will be deleted
after 1 week. It is a very common
faulty found in onkyo av-amp, very easy to get fixed,
however. I won‘t tell you here. Why? I buy faulty av-amp to repair, selling them on the web!.3_31_2020_7_49_47_am.jpg

Onkyo Audio... | Answered on Mar 31, 2020 | 60 views


https://www.youtube.com/watch?v=gfJEw-VlpWY

Hold the "VCR/DVD" button while pressing the "On/Standby" button, and the receiver should enter "Standby." Turn it on again by pressing the "On/Standby" button. Bear in mind that this will clear all the presets and other settings - but it may be those settings that are causing the problems.

https://www.techwalla.com/articles/how-to-troubleshoot-onkyo-receivers



Onkyo Audio... | Answered on Mar 26, 2020 | 66 views


You need to check 3 things:

1) DTS will only work through a digital connection (coaxial, optical, or HDMI) between your receiver and dvd player. DTS and Dolby 5.1 cannot carry a signal over red and white rca connections.

2) After number 1 is solved ensure the reciever is set to the digital channel, your DTS-HD in this case, or in an auto mode.

3) Finally the most important is that the signal is a DTS signal. Start a DTS capable dvd, go to the sound menu and set it for DTS.

Press play and all should be well...

Cheers,

NTIMID8

Onkyo Audio... | Answered on Mar 18, 2020 | 475 views


Los amplificadores de audio del aparato estan a punto de danarse,checa las bocinas una por una a ver si no hay alguna mala.

Onkyo TX-SR602... | Answered on Mar 17, 2020 | 534 views


Pressing the Setup button on the remote should make it leave the setup menu.

Onkyo TX-SR702... | Answered on Mar 16, 2020 | 417 views


Hello Randy Risher, At this point being that you are not getting any audio from any source, I would suggest a reset. To do this press and hold down the Tape 1 input on the receiver. While holding that button down press the Direct Tuning button. You will see the word CLEAR in the screen which indicates that you have done the reset correctly. If after the reset the audio does not return then the unit would have to go in for service. However, being that it is very old (2004 model) it's not guaranteed that there are parts available for the receiver. I would call our product support team at 800-229-1687 x3 to see if your receiver is eligible for trade in program. Thanks, FJD

Onkyo TX-8011... | Answered on Mar 07, 2020 | 332 views


If you want to DIY, send an email to me . This email will be deleted after 1 week. It is a very common
faulty found in onkyo av-amp, very easy to get fixed,
however. I won‘t tell you here. Why? I buy faulty av-amp to repair, selling them on the web!.

Onkyo Audio... | Answered on May 28, 2020 | 70 views


Just freq. error, by lowering the input
freq. can fix the problem.

Onkyo TX-SR605... | Answered on Mar 02, 2020 | 425 views


Are you playing a TrueHD format disc? Just like DTS 5.1 or any other format if your disc isnt coded in TRUEHD then your not going to get it. DTS or other formats cannot be "converted" to TrueHD like the video portion of a standard def disc. At this point there arent alot of TrueHD discs out but be paitent, this may change. Or not, due to the fact there are other "lossless" formats that may be more widely adopted. Sort of like DTS and THX were when DVD first came out. Hope this helps.

Onkyo TX-SR605... | Answered on Feb 26, 2020 | 212 views


Onkyo DV-CP706B 6-Disc DVD Player (Black) - Amazon.com

www.amazon.com/Onkyo...Player-Black/.../B001AMS...

Amazon.com, Inc.Color: BlackChange .... It's quieter than it was before, and it plays ALL DVDs, even if you can see some visible damage ..... THere was no color-just black & white.

Onkyo dvd player no color only black white Questions ...

www.fixya.com > Forum > Tags > dvd player no color only black white
Onkyo dvd player no color only black white related problems. Ask your Onkyo dvd player no color only black white questions. Get free help, advice & support ...

Onkyo dvd player plays black white Questions & Answer


Onkyo Dr-s2.2... | Answered on Feb 14, 2020 | 235 views

Not finding what you are looking for?
Onkyo Logo

Ask a Question

Usually answered in minutes!

Popular Products

Top Onkyo Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

The Knight
The Knight

Level 3 Expert

76390 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...