Paslode finish nailer has no spark
Paslode with no spark could be one of a couple of things. First, is the tool clean? These tools are notorious for failing due to the amount of sludge that builds up inside the tool from use. If you are cleaning the tool yourself, you should make sure the wires leading to the fan unit are not getting kinked or pinched during reassembly. Lastly, the tool needs a new spark unit. One way to test this out is to remove fuel and get ear close to rear of tool for a test shot. If you hear the click of the spark plug then the spark plug is fine and chances are that this tool needs to be cleaned.
How do you test the module on Briggs & Stratton motor
Check to see you have voltage getting to the module and you are getting spark.
If you are getting voltage to the module but no spark it means either the module is bad or the coil is open. You can check the coil windings with an ohm meter... no continuity means the winding are burnt. Dead short means the windings have fused to the core.
Next test is to try another module.
The movement on the second hand is jumping every 5
Many high end quartz watches have a feature called the EOL or end of life indicator. This causes the seconds hand to jump 2, 3 or 5 seconds depending on the make of watch when the battery life is low. The watch will continue to keep accurate time until the battery dies completely. So, when you see your seconds hand jumping multiple seconds it is time to get a battery.
Manual for Omega serger 15J134/RC
I've read that the Elna T34 serger is basically the same as your Omega model. If you search online, you will find places that will let you download a manual-for a price.
Sometimes, if you search for and find a corporate phone number, the company will be happy to mail you a copy.
Good luck.
Omega 8003 will only reverse
I talked to an Omega tech, and he walked me through a home fix. If you open the juicer and look at the switch from below there are two sets of connections. Just move the red, blue, white connections to the opposite side (make sure the unit is unplugged when doing this).
JUICER WILL ONLY GO IN REVERSE
I talked to an Omega tech, and he walked me through a home fix. If you open the juicer and look at the switch from below there are two sets of connections. Just move the red, blue, white connections to the opposite side (make sure the unit is unplugged when doing this).
Not finding what you are looking for?