OKI MICROLINE - Recent Questions, Troubleshooting & Support - Page 6

IF you did not turn the printer off before removing the head you probaly just blew the fuse

Most likely a bad printhead

you can download the driver from here:http://my.okidata.com/pp-ML320Turbo.nsf/openingdrivermenu?OpenFrameSetgo to above site and click on your operating system ,then you can download driver.

do you use tractor paper or plain sheets,if tractor and rear feed gear is engaged and sensor does not see that it is and is then by default it would try to print as on sheets but actually prints on tractor paper

have you checked the wall socket , try another wall socket , try another power cord ,and check if all is switched on

check if all sensors work freelyand print head moves freely from side to side

When the alarm light is blinking what other lights are on. This is the fatal error code with the printer.

Remove the ribbon. if still not moving smoothly unit needs service. 3 year warranty on this unit brand new.
If you cannot move the carriage back and fourth accross,

there is a seriuois issue. unit requires service.