NorStar Logo

NorStar Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 250 Products
  • 2K Answers

Did you check for the volume control and its adjustments? Do you have the setting on "mute?"

NorStar M7310... | Answered on Mar 24, 2016

You NEED to get SYSTEM documents (Hard Copy or CD)
for NORTEL NORSTAR CICS before TAMPERING ...URL posted below...

Found on page 24:
Default Password Code is "admin" on your phone dial... Done by pressing 23646 on your phone dial...

Time feature is accessed by inputting **8463 = (**TIME)

Hope this helps...

(CAUTION: read & understand BEFORE programming)

NorStar T7316E... | Answered on Feb 04, 2016

PDF]Telephone Features Programming Guide - Avaya Support AvayaNORTEL NETWORKS is a trademark of Nortel Networks. ... All other trademarks and registered trademarks are the property of their ... One-line and two-line displays . ...Memory buttons . ... Call anomalies for telephones without line buttons . .... Select how you dial your calls . ... Receive a busy signal on an internal call .

Norstar How to program phone how to program voice mail ...
Nortel Networks Meridian Norstar How to program voice mail phone feature codes ...Modular ICS KSU must be programmed with an M7310 or a M7324 telephone. ... Lift handset, press Voice Call key or press the Feature button, then press 66 2. .... At the LOG: prompt, enter your mailbox#(extension #. and your password all ...


NorStar M7324... | Answered on Jan 18, 2016

The restrictions are intended to prevent you from making long distance billable calls using a company phone. The restrictions are set at the time of initial installation of the system.

NorStar M7310... | Answered on Jan 06, 2016

If you mean for line 3 to be selected when you pick up the handset, you need to program that as the "prime line" for that set.

NorStar M7310... | Answered on Dec 21, 2015

Press Feature 985 - press 9 even when not listed in options. At the password prompt enter 73738767793 and answer the reset password prompt with yes. This will reset the password to default.

NorStar T7316E... | Answered on Dec 08, 2015

Sounds like your going to have to reset the administrator password to get in.To reset the administrator pasword enter feature 985 press 9, at the password prompt enter 73738767793 (resetsmpwsd) and press ok or #,press yes to reset password. password should be defaulted to 0000. then try Feature 983. if your system has 2 digit intercom #s your password is 120000 if your system has 3 digit intercom #s your password is 1020000.

NorStar M7324... | Answered on Dec 08, 2015

Good Morning Kim

You can find the complete manual for the NorStar M7324 here

Looking through a bit, you may be in an 'outgoing calls barred' state. which you may need to talk to your sys-admin about. See Page 14 of the document. There are also sections about logging in and logging off the phones later on. If your sys-admin has set phones so that they need to be logged into to make calls (perhaps to track long distance charges), then perhaps you are logged out.

I hope this helps.

Good Luck

NorStar M7324... | Answered on Nov 19, 2015

To program a button to forward on Norstar (if do daily)
Feature * 1
Press spare button
Enter the * code, enter a few pasuses (Feature 78), enter the outside phone number.

To program a canel button:
Feature * 1
Press spare button
Enter the * code

NorStar M7310... | Answered on Oct 23, 2015

It is called a do not call list. > Home > Phone

NorStar Nortel... | Answered on Oct 14, 2015

It's not so much removing Denied in Admin as it is enabling whatever feature the user was trying to access at that set.
Which was... ?

NorStar T7208... | Answered on Oct 06, 2015

usually the admin password is left at admin (23646)

NorStar T7208... | Answered on Oct 06, 2015

You shpuld check the user's manual of your cantral, starting with the queston if it supports this function.
If don't have a manual, you can look for one online using Google search for
MANUAL, NorStar Phones and THE MODEL

NorStar Lands... | Answered on Sep 30, 2015

Ask the central.
If there is no operator, ask someone push extensions till yours start ringing

NorStar Lands... | Answered on Sep 30, 2015

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top NorStar Experts


Level 2 Expert

64 Answers


Level 3 Expert

85239 Answers

Tom Chichester

Level 3 Expert

55379 Answers

Are you a NorStar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides