Necchi Logo

Necchi Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 15 Products
  • 1K Answers
  • 55K Views

You can purchase a copy of the Necchi 537L manual as either a PDF download or a printed manual here: https://www.sewingpartsonline.com/instruction-manual-necchi-537-l.aspx? . There are several online guides for threading Necchi machines. These may help. However I don't know how different the leather and lace 537 is from other Necchi machines. The manual will have the threading diagrams.

I hope this helps .

Cindy Wells

Necchi Sewing... | Answered on May 04, 2018


How Bitcoin Transactions Work? https://cryptocomes.com/wikicoin-how-bitcoin-transactions-work

Necchi Sewing... | Answered on May 01, 2018


Install a brand new needle and make sure it is installed correctly. If it still hits the bobbin case, the machine has probably been knocked out of time. Search for "sewing machine timing" or take it for service.

Necchi Sewing... | Answered on Apr 29, 2018


Probably not much. Necchi machines are very common. Search on eBay and other web sites. It is probably worth more to somebody as a sewing machine than as a collector. They are good, tough machines.

Necchi Sewing... | Answered on Apr 28, 2018


This video may be helpful. Not quite your model, but machines generally operate very similarly.

How to thread Necchi model 535 FA sewing machine now with captions

or you can order a manual for your machine:

https://www.sewingpartsonline.com/instruction-manual-brother-home-lock-546.aspx


....

Necchi Sewing... | Answered on Apr 12, 2018


I think it is easy
Students are you ready to know completely about the <a href="https://www.gsebsscresults2018.net/">GSEB SSC result 2018</a> of of the academic session 2017-18?? Then, you must continue to read this article as we have given all the updates of GSEB SSC Result 2018 at one place which you can't find it anywhere online
GSEB SSC Result 2018 Gujarat Board 10th Class Results

Necchi Sewing... | Answered on Apr 05, 2018


hi there,
well, common problem when you didn't acquired right set up of tension and clean feed dog,bobbins,shuttle race.on figure right bobbins winding.d329aa1.jpgset up counter clokwise thread rotation, set dial tension on #3 to #4, dial stich to # 8 to #12
only on cotton fabrics,others fabrics such as silk..etc,gradually adjust tension fine the smoothest adjustment,
on fig,thread looping top side threading50302ec.jpg follow threading so you can have fine sewing.also clean under bobbins from chips fabric and dust.have a nice day,don't forget to rate my fix,ythanks a lot

Necchi 3101... | Answered on Apr 05, 2018


No, Fixya doesn't.

Necchi Sewing... | Answered on Apr 04, 2018


Try Googling (necchi)(3050cl)(manual) without parens.

Necchi Sewing... | Answered on Mar 26, 2018


Um-hmm. Been there, done that! Hopefully, you have a manual (I'm not able to find one online).

Here are a couple of hints:

Remove all the thread from the machine.
Recommend using the colored threads that match the machine's guide--will help you figure out which thread is misbehaving.
ALWAYS RAISE the presser foot and thread each in the correct order! Check your manual, but most machines need to be threaded #3 (upper looper), #4 (lower looper), then the needles.
With each thread, grasp the thread below the thread tree and also below the tension disk and give a gentle tug. Sometimes the thread will pop when it seats in the tension unit.
The lower looper thread tail should drape OVER the top of the upper looper and thread, then sweep all threads toward the back of the machine and under the presser foot.

You might try contacting the Necchi Support service.

Necchi Sewing... | Answered on Mar 23, 2018


Try Googling (Necchi)(4070)(manual) without parens.

Necchi Sewing... | Answered on Mar 21, 2018


The problem most likely is not the bobbin. The problem is the top thread. If thread is knotting, tangling under the fabric, it is a top thread problem.

Remove the top thread from the machine. ALWAYS RAISE the presser foot and rethread from the beginning.

If there are still thread clumps under the fabric, you will need to increase the top tension. (The extra thread appearing under the fabric is excess top thread hanging up under the fabric.) You may need to keep adjusting the top tension until both top & bobbin threads meet in the middle of the fabric.

....

Necchi Sewing... | Answered on Mar 12, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Necchi Experts

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Brad Brown

Level 3 Expert

18321 Answers

Are you a Necchi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...