NEC Audio Players & Recorders - Page 2 - Popular Questions, Answers, Tips & Manuals
How so i change the employee name on phone?
Press speaker key dial 700 Enter extension number (which will be 3 numbers like 101). Use the keypad to enter name (up to 12 characters) use # in between if there is a letter on the same button your just pressed. Press speaker once you've finished typing the name.
We got our computer fixed, because we had a virus.
First you may want to check if the connection is good. You may want to check that speakers jack is pluggeed in green jack of the pc. If the connection is good you may want to install again audio drivers for your pc
3/6/2011 8:26:03 PM •
NEC...
•
117 views • 0 helpful votes
My wife and I moved.
You should have a cable that connects one speaker to the other directly. Then there's the power cable, and there should be another cable connecting the PC to the speakers.
Important: The PC's audio-output is usually marked with green color, that's where you should connect the cable going to the speakers.
Hope the above helps!
No mixer, audio to have
if your computer came with a motherboard disc the sound drivers could be on it
you might have to uninstall then restart your computer then reinstall both the sound drivers and the sound card make sure you have both of these devices backed up to a disc before uninstalling
a yellow? question mark means you need to install/update driver to do this
right click to install driver also
click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers
click start control panel sounds and audio,volume,advanced,speakers make sure you have selected the
(((appropriate speakers))) also audio you will find 3 drop down lists make sure you have the correct settings there
also
click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar
if his does not fix the problem
have you tried this control panel sounds and audio,volume,advanced,speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand,system speaker right click properties then select use this device (enable) also you might check
the speakers plug/outlet is usually at the back of the computer you will have to open up the computer to check the lead attached to the rear of the input plug make sure the connection is good
try cleaning your computer of dust using a fine air blower from a compressor making VERY sure that there is no MOISTURE in the air line specifically around the sound card and the CPU central processing unit dust causes static to build up in a computer
hope this helps
don
2/24/2011 5:14:05 AM •
NEC Audio...
•
73 views • 0 helpful votes
I cant get my NEC speaker to work for my computer.
click start control panel sounds and audio,volume you can adjust the volume or
advanced,speakers select appropriate speakers or
audio you will find 3 drop down lists make sure you have selected the right speakers or control panel,administrive tools,computer management,device manager scroll to sound,video and game cotrollers could be a yellow question mark? right click to re-install drivers
hope this helps
How do you get speakers
click start control panel sounds and audio,volume you can adjust the volume or
advanced,speakers select appropriate speakers or
audio you will find 3 drop down lists make sure you have selected the right speakers or control panel,administrive tools,computer management,device manager scroll to sound,video and game cotrollers could be a yellow question mark? right click to re-install drivers
hope this helps
The speakers are intergrated in to the monitor and don't seem t.
First, find out if the speakers or audio is working properly. At your PC menu, left click Setting, Control
Panel, and Add hardware. Click the add hardware wizard and just follow the instruction until you will find all the installed hardware of your PC. Click at the Audio, and the sound driver of your PC to find if these are working properly. Assuming that this are working
properly, test the audio output of your PC by putting
in another set of speaker (borrowed or otherwise).
If you hear the sound, then it is a connection problem. The wire to the speaker could be broken, or
the speaker itself. Under this condition, it is your
option to open up your monitor and test the speakers.
Or to just buy a new set of speakers. Unless you
are familiar with handling an open monitor, you may
go ahead with opening the monitor Otherwise, it is
wiser to buy the speakers which is much cheaper
than a monitor that could accidentally get damage.
I cannot open my computer because license of
You might just be able to go to:
Start > Control Panel > System
You should see a place where the product key is. There might be a button there to activate or put in a new key. What you need to do is look at the sticker on the side of your computer and there will be a Windows Product Key there. Just input that one in because it is the correct number.
That should work. I just had the same problem on mine. It had some number already in it but it was wrong. I had to get the real number off that sticker. Once you buy Windows, it doesn't go away, it is yours forever - unless you just downloaded a trial version or something.
12/7/2009 5:16:31 AM •
NEC Audio...
•
70 views • 0 helpful votes
Speaker does not work
Assuming you are running XP.
If it hasn't installed the device ,
uninstall and reboot then restart
device should autofind and self install
Let me know how it goes thanks
Please rate me ,,,Cheers
NEC Built-in Speaker
There is only 1 way. You should get original drivers for NEC then only it will work!
Audio problem
try to shut down system and turn back. if not working check you sound card. if need you have to replace. first let me know.
My roadking rk4000 wont charge. I turn it off to charge it but there is no indicator light at all, any suggestions?
Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first.
But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.
Openfit Shokz battery replacement?
Question edited for clarity, typo and CAPS.
Question moved from Cars and Trucks category.
Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries.
How long is the warranty on AfterShokz?
While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase.
Jan 11, 2019
https://www.google.com/search?q=Openfit+Shokz+battery+replacement
..
Audiosonic CR-06PL not changing time when following manual instructions.
Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour.
Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min.
How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .
Not finding what you are looking for?