NEC Audio Players & Recorders - Page 2 - Recent Questions, Troubleshooting & Support

0helpful
1answer

NEC DT300 has call light flashing red with no call on the line. How do I make it stop?

PUSH JUST THE BUTTON SPEAKER TWICE IT MAKES THE HAND FREE CALL YOUR PHONE WAS FORGOTTEN ON FREE HANDS CALL
10/26/2014 10:32:11 PM • NEC Univerge... • Answered on Oct 26, 2014
0helpful
1answer

Why has the phone reversed, dial tone works only when phone is hung up why?

If I understand you correctly, when you leave the handset in the cradle and press a line, you can hear the dial tone. But, if you lift the handset and then select a line you don't hear anything through the headset. If this is correct, I suspect the handset is damaged, the cord is damaged, or if you're lucky, the clips may not be plugged all the way in on both sides. If you have another phone that is the same, you can switch handsets to test this theory.
10/19/2014 7:21:52 PM • NEC 22b Hf... • Answered on Oct 19, 2014
0helpful
1answer

Change the bulb on NCE v260X and I still have white snow flake when I turn it on

Have you adjusted the contrast and Keystone. A new bulb should be plenty bright. Maybe clean the lens. There is in some types of Projectors a color wheel inside this can become dusty. But not often if you keep the filters in place and clean them. This could cause a snowy picture as well. Hard to say without actually seeing the picture to say what the issue could be. But these are some of the stronger possiabilities.
9/30/2014 9:49:54 PM • NEC NP-V260 DLP... • Answered on Sep 30, 2014
0helpful
1answer

Why is my display is flashing "BATTERY LOW" where is the battery located?

Look on the bottom for a door to access the batteries. If all else fails go to the manual you received with the phone and follow its instructions.
4/28/2014 4:09:02 PM • NEC Electra... • Answered on Apr 28, 2014
0answers

Nec microwave

Be the first to answer 4/13/2014 9:05:22 PM • NEC Audio... • Posted on Apr 13, 2014Be the first to answer
0answers
0helpful
1answer

Line three comes up busy and says vacant number

There is either no outside line connected to that port on the switch or you do not have access to that line.
4/4/2014 10:36:24 PM • NEC Dx7na 12txh... • Answered on Apr 04, 2014
0answers
0answers

Nec dt300

Be the first to answer 3/20/2014 3:48:34 AM • NEC Univerge... • Posted on Mar 20, 2014Be the first to answer
tip

NEC GMS08N speakers hum

I had the same problem. Be careful not to use a stereo 3.5 mm to stereo 3.5 mm cable (same at both ends); and do not plug it from your computer output into the speaker 3.5 mm "out" as it is will transfer the sound but seems to cause feedback. It is tempting to do as this looks like how it should be wired - similar to most other speakers. But it says "out" not "input" on the speaker. My motherboard burned out - for some reason... I hope not because of this, but maybe. Use the stereo 3.5 mm to RCA/phono "line in" cable as others described on this site. I'm not really sure what the extra 3.5 mm "out" socket (next to the L speaker output) is for - maybe to connect more speakers?
Not finding what you are looking for?
NEC Logo

84 questions posted

Ask a Question

Usually answered in minutes!

Top NEC Audio Players & Recorders Experts

Ekse

Level 3 Expert

13435 Answers

 Grubhead
Grubhead

Level 3 Expert

5720 Answers

The Knight
The Knight

Level 3 Expert

76703 Answers

Are you a NEC Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...