NEC Computers & Internet - Page 6 - Recent Questions, Troubleshooting & Support

The P300 has 3 kinds of reset mechanisms, 1. Soft Reset: you can keep all DRAM data. Procedure: Push the Reset button 2. Hard Reset/Save SDRAM -- Use hard reset/save SDRAM mode to reset the MobilePro P300 without losing the data in SDRAM. Use this mode if the safe software reset mode doesn't improve system operation. Procedure: Reset Button and Power Buttons at the same time. 3. Hard Reset/ Clear SDRAM: You will lose all data. Use to reset the MobilePro P300 and delete the contents of SDRAM. Use this mode to reset the MobilePro P300 to its factory defaults. This is also referred to as a hard reset/clear SDRAM. **Caution** This procedure will delete all user installed applications and user data. If necessary, back up your data before performing the hard reset. Procedure: Push the Reset, Power, and Record Buttons at the same time

NEC MobilePro... | Answered on May 15, 2017

Cables usually give up first. If you can substitute the cable or another monitor try that. If you see the same thing on the monitor, you have eliminated the cable. If you have another monitor you can beg borrow or steal from a friend, try doing that. If the problem still follows, then you have eliminated the monitor and the video card is the only thing left. If your PC has a built-in video card then the motherboard is toast

NEC MultiSync... | Answered on May 10, 2017

There is a few different ways you can do this:
Search google for NEC Versa VX PC Notebook Audio Drivers
Go Here:

NEC Versa VX... | Answered on May 08, 2017

NEC Versa VX... | Answered on May 08, 2017

NEC Versa VX... | Answered on May 08, 2017

go to folowing link you will find your drivers

please vote me if you get your solution

NEC Versa VX... | Answered on May 08, 2017

  • Complete service manual with an error search tree , sometimes there is a vertical ic defect by deformed capacitors hanging around that or a powerline from powersupply failed (sometimes there could be a defect fuse resistor to find ) or only a bad factory cold soldering by manipulate some passive components somewhere in vertical stage .

Mitsubishi Diamond Plus 93SB Service Manual

NEC Mitsubishi... | Answered on May 06, 2017

Not finding what you are looking for?
NEC Logo

2,702 questions posted

Ask a Question

Usually answered in minutes!

Top NEC Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Cindy Wells

Level 3 Expert

6164 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you a NEC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides