NEC MultiSpin - Recent Questions, Troubleshooting & Support

get the manufacturer of the speakers to be connected go on that web page , find a download suitable for that model and also suitable for the win operating system you have download then run the download see if that works

MAY BE NERO SOFTWARE CAN HELP U TO DO U R STUFF MAN..

 

best regards & best of luck..

Not sure what the CPU has to do with anything! The following might help with CD/DVD drive jumper settings: http://www.computershopper.com/storage/howto/installing-a-new-dvd-burner4

This might help you: http://www.computershopper.com/storage/howto/installing-a-new-dvd-burner4

not sure how its recognised on control panelClick start control panel administration tools computer management device manager scroll down cd-dvd rom drives you might see a yellow question /exclamation mark ? ! or a red X right click to update driver you might have to physically unplug the leads for this cd/dvd restart your computer then plug them back this should activate the found new hardware wizard if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

hope this helps you

Click start control panel administration tools computer management device manager scroll down cd-dvd rom drives you might see a yellow question /exclamation mark ? ! or a red X right click to update driver you might have to physically unplug the leads for this cd/dvd restart your computer then plug them back this should activate the found new hardware wizard if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

hope this helps you

Try cleaning it with alcohol on a Q-Tip clean the eye that is located in the drive it will be on a slider . If that doesn't work the replace the drive they do go bad after extended use you can Find one at New Egg for less then 25.dollars

clean first your optical lens. but sometimes cd function has no more ability to write on cd if lens is damage.

http://support.necam.com/Optical/downloads/FlashFirmware/readme.asp?ID=2

you might need to update the drivers for windows 7. here are some other things you might try make sure that the cd burner is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or your drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd/dvd burner then plug them back in or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device click start control panel administrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall hope this helps you only need to do this if you cant see your drive in my computer/windows explorer if this does not fix the problem it might be a registry problem Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

hope this helps

make sure the CD or DVD media you isnert is compatible for read/write opeartions

this DVD/RW is 12x40 trasnfer (rate read) and 4x16 write +RW

what format or speed CD media are you inserting ? go to this link to give you a better look at the specs of this NEC product you have

http://support.necam.com/optical/specs/nd-1100a.pdf

if this helped you , please rate me

the lens might probably be weak and the ROM might be old.Best solution is to replace it.

No. If you have a CD-writer, you cannot burn onto a DVD-disk.

try to go to registry editor and delete upper/ Lower filter. It should resolve the issue

Hi,

With Windows 98 being such an outdated operating system there is no more support from Microsoft.

You have two options here: You can download a another burning suite that will work on Windows 98. Something like Nero 5 for example. I have provided a link below to download Nero 5 Lite. This should allow you to burn your data to a DVD. Link below >>>>>





http://www.brothersoft.com/nero-5-lite-download-263017.html






Another option is to use the files and settings transfer wizard. If your upgrading the operating system to XP then you can use the wizard which is on the XP disk itself or download the program from Microsoft downloads.
For an in depth look at how to use the files and settings wizard please click on the link below >>>>






http://www.microsoft.com/windowsxp/using/setup/getstarted/bott_fstw.mspx





If you need anymore help or advice please post back.


Regards.

All drives are different, you have to look on your drive for the pin config