Neato Vacuums - Recent Questions, Troubleshooting & Support
My neato d 80 tells me to open bin put switch to if i triy it will say battrey low need to charge battrey beattrey is new
It sounds like you are having some issues with your Neato D80 robot vacuum. Here are a few things you can try to troubleshoot the problem:
- Make sure that the bin is properly closed and seated in the vacuum. If the bin is not closed or seated correctly, the vacuum may not function properly.
- Check the battery to make sure it is fully charged and properly installed in the vacuum. If the battery is low or not properly installed, the vacuum may not function properly.
- Check the charging cord and charging port to make sure they are not damaged and are making a proper connection.
- If the problem persists after trying these troubleshooting steps, you may need to take the vacuum to a repair center for further diagnosis and repair.
Neato robot turns on, fires up vacuum/brushes, but won't move - no error messages. What gives?
I have a Neahis to Botvac 85, had also problem, it started up then stopped. It is 2 or 3 years old, don't remember. but it started to ack very strange with the battery. then this start/stop problem came. I ordered a new originial battery and thought it should solve the problem but no it didn't After some time I decided to try again. Started Neato and it stopped after some time, then I wanted to see if the lidar was rotating so I removed the blue cover over the lidar and could see that it was rotating, then I touched it little bit and the neato started and started to clean my floor. so try this.
Not finding what you are looking for?
