Murray Garden - Recent Questions, Troubleshooting & Support

1 Answer

Belt routing diagrams for Murray Select 46 inch cut 21hp riding mower drive belt

there you go

Murray Garden | Answered on May 17, 2020

2 Answers

I have a 91Murray 42inch riding mower need proper size belt to run blade,a blade belt

Contact a local auto parts store, a full service one, bring in the old belt and they can match it.

Murray Garden | Answered on Mar 02, 2020

1 Answer

Need the size of deck belt for a sentinal Murray 145/102

Check your user manual for the parts. If you don't have it anymore, see this web site where you can download one: https://www.murray.com/eu/en_gb/support/manuals.html

Murray Garden | Answered on Jan 06, 2020

1 Answer

Murray lawn tractor won't turn over unless you attach jumper cable to battery to starter with key in on position and clutch depressed. starts right up

Typical riding mowers require BRAKE ON and PTO OFF to engage starter when ignition switch is in the start position.

Murray Garden | Answered on Nov 02, 2019

1 Answer

What's the mixture of oil to gas with a Murray weed eater MS 2550

It is most likely 50:1
So mix 2.6 ounces of 2 stoke oil to a gallon of gasoline

Murray Garden | Answered on Oct 29, 2019

1 Answer

I have a Murray 2510 weed eater and need to know which wire red or black goes on the top prong of the kill switch

Contact Murray directly and request a wiring diagram (just to be sure).

Murray Garden | Answered on Sep 26, 2019

0 Answers

What is the correct spark plug for a 2510 Murray weed eater

It is an RDJ7J Champion spark plug

Murray Garden | Answered on Jun 10, 2019

0 Answers

How do you check trans oil level on a Murray lawn tractor model 7800370

Murray Garden | Posted on Jun 05, 2019 | Be the first to answer

0 Answers

How to change string on a murray string trimmer

Murray Garden | Posted on Jun 04, 2019 | Be the first to answer

0 Answers

What size of line do i need for a murray 2510 weed eater

Murray Garden | Posted on Jun 01, 2019 | Be the first to answer

1 Answer

Murray 2003 20hp laawn tractor engine quits when mower deck is engaged while in reverse...

that is a safety feature. most mowers have a bypass that you can use to back up. if not you will have to shut blades off and restart when done reversing.

Murray Garden | Answered on May 21, 2019

1 Answer

How do I take head off of my m2500?

Hey there! My first suggestion is to always check the user manual first, there is a section which explains on how to take the head off in a few easy steps. Here's the link: https://gdgtpreview.com/2019/03/murray-m2500-string-trimmer-user-manual

Murray Garden | Answered on May 03, 2019

1 Answer

Where is trans. unlock so you can push when not running. 3800 Murray

On my mower I just shift the transmission into N

Murray Garden | Answered on Apr 06, 2019

2 Answers

Need manual for murray model 42591x92

Google (murray)(42591x92)(manual) without parens.

Murray Garden | Answered on Apr 03, 2019

1 Answer

My Murray m2500 starts but when you try using it will not excel rate and stay running what might I try to fix the problem thanks

Carburetor probably needs removed and cleaned and while at it check and replace if necessary fuel lines also check fuel tank for trash and clean if necessary.

Murray Garden | Answered on Mar 29, 2019

2 Answers

Returning wires back to the solenoid starter on the Murray12.5 HP

ALWAYS disconnect the battery to frame (ground) connection while servicing electrical systems.

There should be two larger red wires (~8AWG), a smaller red wire and a smaller Orange/White wire. Identify the large red wire from the starter and attach it to either of the two large solenoid contactor posts. Then connect the other large red wire comming from the battery AND the smaller red wire to the other large contactor post. Then connect the Org/Wht wire to the smaller solenoid (+coil) post. Reconnect battery ground.

Refer to wiring schematic
https://www.partstree.com/parts/mtd/mowers-lawn-garden-tractor/13bc76lf058-murray-lawn-tractor-2014/wiring-schematic-725-04849c/