Motorola Mobility Cell Phones - Recent Questions, Troubleshooting & Support
you may visit some Motorola mobile sites.....
Motorola...
•
Answered
on Apr 19, 2021
yes you can with the help of a usb data cable and motorola tools software, which you can download from motorola official website.
Motorola...
•
Answered
on Apr 06, 2021
take it to a phone store and see if they can boot it to factory settings
Motorola...
•
Answered
on Apr 06, 2021
Hello PattiPaige,
The feature to disable answering the phone when you open the flip can be found under:
Settings & Tools
- Call Settings
- In Call Setup
- Answer Options
- Set option to Off
This will disable the flip from answering the call when opened.
As for increasing the font size, i don't believe there is an option to do so. If I become aware of one I'll try to get back to you on.
Hope this helps,
cHiPz
Motorola...
•
Answered
on Mar 29, 2021
you cant retreive a deleted massage sorry
Motorola...
•
Answered
on Mar 13, 2021
this happens to phones that have had water damage or something else and a way that might make it work is to take the battery out for no more than 60 seconds and put it back in and push the *,# and power buttons at the same time and if the blue screen comes up, while on the screen push the buttons and hold them until it goes normal. it worked for me
Motorola...
•
Answered
on Feb 25, 2021
First thing to note is that the deleted data on the phone will remain there until something new is saved and overwrites it. This might not happen immediately but eventually, after continued use, it will.Either connect the phone straight to a PC using a USB cable (if supplied with the phone) or take the card out and put it in a card reader attached to the PC. You should see memory card shown as a drive letter (like H:) in Windows Explorer.Then try some photo recovery software on the PC. This should recognise the phone or card and then you can scan it using the free download of some good photo recovery software. That will show you what files still exist on the phone or card and what can be recovered.
http://www.asoftech.com/apr/
Motorola...
•
Answered
on Feb 18, 2021
Hi Tanya,
In that case you will need to contact your carrier, so they can help you with that.
Regards,
Maya
Motorola Support
Motorola...
•
Answered
on Feb 11, 2021
last week i found a website to unlock my mobile, it is reliablee not much cost but this is not free of cost, if you want just try
http://www.unlock-zone.com/
Motorola...
•
Answered
on Feb 05, 2021
John,
What kind of code is the phone asking you to put in?
Special code
Security code
Master code
Motorola...
•
Answered
on Jan 22, 2021
ENTER UNLOCK CODE REMOVE
Motorola...
•
Answered
on Dec 31, 2020
i have a motorola k1 that comes from the Uk but it is asking for subsidy code
Motorola...
•
Answered
on Oct 22, 2020
Yes, sort of: go to Settings->Security->Enter lock code here if you've created one(otherwise ignore this step)->Limit Use->Restrict Incoming Calls
From this step, you'll have to choose to restrict incoming calls from anyone NOT in your Contacts . You'll still get the voicemails and notifications of who called, but unwanted callers will go right to voicemail and you can call them back whenever you are ready.
Motorola...
•
Answered
on Oct 02, 2020
Are you guys serious....
Verizon & Alltel (which happened to recently finalize the merge) use CDMA. CDMA does not use SIM cards.
AT&T, T-Mobile, etc. use SIM cards - wheter they are 3G networks, TDMA, etc.
Motorola...
•
Answered
on Oct 02, 2020
This is a common problem, it has to do with the keypad flex. either the connector on the top part of your phone is unpluged or your flex is damaged. Open the top of the phone where the screen is at (4 torx screws) genlty remove the cover. you will see two connectors, one that goes to the camera, the other is the one you want. genlty pry it off upwards, I would also clean it with some IPA (rubbing alcohol) and a brush, re-connect it pushing down firmly, you will fill it when it connects. if it doesnt work, you can purchase a new flex, if you need repair help, let me know I can try to repair
Motorola...
•
Answered
on Oct 02, 2020
I plugged my phone up and all of a sudden got the message "Unable to charge" on it. I changed chargers (i had an extra one), i changed batteries (i had an extra one), and i swapped every combination imaginable.
My solution....
My Razr's plug has an opening to plug the phone that resembles a person's navel, and it got dirt and dust bunnies in it while it was in and out of my pockets. I was able to take an old tooth brush (or your new one if your really desperate), and got a can of office duster that you use to clean keyboards. Turn the can of office duster upside down for a second while you are spraying it and liquid will come out as you are spraying the connector. Immediately after that, use your toothbrush to work it inside the dirty connector to free it from anything that will keep it from making good contact. Then, hold the can of office duster upright and it will only spray air... and blow the connector free of anything that you loosened with the brush. Repeat this process if after all this it still doesn't work... because you have a REALLY REALLY dirty connector if it doesn't work after the first try.
Motorola...
•
Answered
on Oct 02, 2020
i need software reset code for moto c168i
Motorola...
•
Answered
on Jul 20, 2020
The flash player only works on 2.2+ versions of android. So you can wait for the official update, or try to find an update online (custom roms).
Motorola...
•
Answered
on Jul 13, 2020
just download a FLV to avi converter
Motorola...
•
Answered
on Jun 30, 2020
Not finding what you are looking for?
