Mitsubishi WD - Recent Questions, Troubleshooting & Support - Page 3

Have you checked DLP termistor?

The colorwheel is your problem. To confirm this, unplug the tv, then listen thru the air vents in the back as you plug the tv in. You will probably hear a ticking sound. If you do, that is the colrwheel. If the colrwheel is working, youwill be able to hear it "spin up". It will be a sudden high pitch whine. Let me know if I can be of further assistance

Basing the replacement of the board on the clicking sound of a relay trying to close is not a safe bet. The first thing you need to do is check the bulb. Then there is a ballast board and then the Power supply board. Parts might be hard to find. Use the website I listed to see what part numbers are then google it or look on eba or amazon for those parts. Mitsubishi WD 60C8 TV Parts

unplug the tv, wait 5 mins plug it back in, and without using the remote, press the tv on button. see if its ok.

In mot of the case, the T-CON board is bad.

Most likely a fuse blew when the lamp blew, there is internal fuses on the power supply board on these mitsubishi's, if the fuse is ok though then most likely another component somewhere failed.

Sounds like the back light has gone mate. Unfortunately this usually makes the tv obsolete

the capacitors on the DM need to be replaced. Very easy repair you can get the repair kit at this link which is for your model it contains the replacement capacitors and step by step insturctions. http://servicemanuals.vstore.ca/product_info.php/pName/v21v19-mitsubishi-dm-repair-kit/cName/repair-kits

The first would be excessive dust causing inadequate airflow through the lamp cage. Cleaning the filter may resolve the problem. It could also be that one, or both, of the temperature sensors could be defective. This is a known problem to the extent that Mitsubishi extended the warranty an extra two years on your model and similar models with the same design. Mitsubishi Digital Electronics America, Inc (MDEA) 2006 DLP® Projection Televisions Models: WD-52631, WD-57731, WD-65731, WD-Y57, WD-Y65, WD-57732, WD- 65732, WD-57831, WD-65831. As part of our commitment to quality and customer satisfaction, MDEA is announcing an extension of the warranty coverage to replace the thermal sensor for the above referenced models. For a period of two additional years beyond the one year limited warranty, MDEA will cover the cost of the thermal sensor (parts and labor) at no charge. All other terms of the MDEA limited warranty will continue to apply.

https://www.mitsubishi-tv.com/asset/file/owners_guide/WD-52525.pdf Page 11 talks about using a paper clip to hit the recessed small reset button. try this

How old is your TV, what is the make and model?

I would lean towards the main board

Hello... About the only thing that can cause this symptom is a bad lamp. Most of the time, you can look at the lamp and tell if it's bad. If it's not shattered, it might have an odd bulge at the base of the reflector, or a gray circle on the clear tube at the bottom. I hope this helps!