Mitac Mio - Answered Questions & Fixed Issues


call the techie. That'll the best

Mitac Mio 168... | Answered on Mar 26, 2017 | 196 views


Do you mean the file in your phone SD card,Wondershare Data Recovery can easily work out it.
Here is the guide:
1. Download and install the data recovery tool on your computer. It's free download.
2. Connect your phone SD card reader to the computer. Open the application, and then select the partition or directory that files deleted or data lost, and then click Next to start data recovery.
3. After a while you will find a lot of files found listed in the list box. Select the files that you want to recover, and then click Next to continue data recovery.
4 Select Path for Recovered Deleted Files.

Mitac Mio A701... | Answered on Aug 28, 2013 | 120 views


Please try and reset the unit , check for fault in the settings . You can also remove the power and try a long reset and if after the boot there is no detection it is best to seek assistance specially if the unit is new as you can avail of free replacement warranty.

Mitac Mio 168... | Answered on Nov 07, 2011 | 236 views


I removed the rubber infill that covered a hidden screw. Released screw and then removed back plate. Removing the battery then required care as it is stuck with two sided tape to the Mio internals. Here I used a knive to prise/cut free.

Mitac Mio P550... | Answered on Jul 04, 2011 | 2,191 views


I had exactly this problem with my pocket PC Mio 168. but thank goodness, i could resolve it about 8 months ago.

you can't change the language of your pocket PC , I mean to say if you change some options or settings in your pocket PC. to resolve this problem you have to flash the Rom of your pocket PC with an other one witch contains the language you want. for example Rom with English language.

so, first you have to download the Rom and software witch it will help you to flash your actual Rom.

sorry for my english

Mitac Mio 168... | Answered on Mar 07, 2011 | 322 views


Please get it here: www.tradebit.com/tagworld.php/pc+manual
Regards

Mitac Mio 168... | Answered on Feb 01, 2011 | 105 views


You can get the Master Reset Code from the service provider and reset it.

Mitac Mio P550... | Answered on Jul 29, 2011 | 432 views


Good day, try the link below hope it will help you.

driver

Mitac Mio 168... | Answered on Jul 26, 2010 | 107 views


try using it without a manual this way you can not get something wrong unless it is very doubtful. and you will tend to get use to it quicker

Mitac Mio P550... | Answered on Jul 03, 2010 | 60 views


up arrow + power_on until MIO logo

Mitac Mio P550... | Answered on Jun 03, 2010 | 1,421 views


your just ****

Mitac Mio 168... | Answered on Mar 26, 2010 | 204 views


http://forum.xda-developers.com/archive/index.php/t-277374.html

Mitac Mio P550... | Answered on Mar 21, 2010 | 182 views


download from here http://www.gpss.tripoduk.com/gpsspuse.htm



if u like please leave comment

Mitac Mio 336... | Answered on Mar 15, 2010 | 110 views


try to restore it to the last working state, remove all cables, slide the switch to off position, wait 1 minute and slide it back on.
once it opens, make a clean boot to erase the errors encountered by your pda and restore it back to its factory setting.

good luck...

Mitac Mio P550... | Answered on Feb 24, 2010 | 204 views


http://www.ipaqrepair.co.uk/view_product.php?product=979

Mitac Mio 168... | Answered on Feb 22, 2010 | 243 views


eBay has them for $10 or so.

Mitac Mio 168... | Answered on Feb 22, 2010 | 96 views


Instructions for the Mio 168 can be found here:
http://www.kolyasoft.com/pocketpc/mio_168_pocket_pc.html

Mitac Mio 168... | Answered on Feb 22, 2010 | 36 views


Mio 168 manual and other documents here:
http://www.kolyasoft.com/pocketpc/mio_168_pocket_pc.html

Mitac Mio 168... | Answered on Feb 22, 2010 | 147 views


The socket on the bottom of these is a common failure point. It wobbles about until the solder cracks then the device won't charge. If you're confident with a soldering iron you might be able to fix it yourself. Remove the SD card and fold the GPS antenna down. Remove the four case screws and carefully separate the back by gently prying it along the join. Watch out for the cable to the GPS antenna. Now you should be able to see the 22-pin socket. The pins are tiny. Very carefully re-solder them, and the ends of the connector where they attach to the PCB. The YouTube video seems to illustrate it pretty well.

Alternatively, there's this option which is altogether more drastic:
http://oasis.halfmoon.jp/other/mio168/mio_dc_socket.html

Mitac Mio 168... | Answered on Mar 26, 2013 | 360 views


how can i subscribe a GPRS settings for my china phone?coz i dont know.. its too hard..

Mitac Mio P550... | Answered on Jan 31, 2010 | 105 views

Not finding what you are looking for?
Computers & Internet Logo

91 questions posted

Ask a Question

Usually answered in minutes!

Top Mitac Computers & Internet Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

matt
matt

Level 3 Expert

1648 Answers

Larry Ng
Larry Ng

Level 3 Expert

5991 Answers

Are you a Mitac Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...