Mitac Mio - Recent Questions, Troubleshooting & Support - Page 2

Please try and reset the unit , check for fault in the settings . You can also remove the power and try a long reset and if after the boot there is no detection it is best to seek assistance specially if the unit is new as you can avail of free replacement warranty.

You can get the Master Reset Code from the service provider and reset it.

I removed the rubber infill that covered a hidden screw. Released screw and then removed back plate. Removing the battery then required care as it is stuck with two sided tape to the Mio internals. Here I used a knive to prise/cut free.

I had exactly this problem with my pocket PC Mio 168. but thank goodness, i could resolve it about 8 months ago.

you can't change the language of your pocket PC , I mean to say if you change some options or settings in your pocket PC. to resolve this problem you have to flash the Rom of your pocket PC with an other one witch contains the language you want. for example Rom with English language.

so, first you have to download the Rom and software witch it will help you to flash your actual Rom.

sorry for my english

Please get it here: www.tradebit.com/tagworld.php/pc+manual
Regards

Good day, try the link below hope it will help you.

driver

try using it without a manual this way you can not get something wrong unless it is very doubtful. and you will tend to get use to it quicker

up arrow + power_on until MIO logo

your just ****

http://forum.xda-developers.com/archive/index.php/t-277374.html

download from here http://www.gpss.tripoduk.com/gpsspuse.htm



if u like please leave comment