Minn Kota Boating - Page 3 - Recent Questions, Troubleshooting & Support
It seems that one of the pieces (possible a set
Its possible your set screw has come out. If you can find the holes to line it up Just keep turning the handle till you see a hole on the inside and get a screw to go into it. Really not sure if this will repair it without seeing it.You may need a bright flash light to see this. If there is still a screw in the handle its possible it may have broken off and needs removing to find the hole on the inside.
12/22/2017 9:10:39 PM •
Minn Kota...
•
Answered
on Dec 22, 2017
I have a minnkota maxxum 74lb thrust trolling
Good day ,
The next time the pin comes out have a close look at it if it has little raised grooves in it that is what is supposed to hold it in.
if so put a little lock tight on the pin and push it back in it should hold again
good luck
Gordy
My MK 110P Battery charger
Probably not... they cost all of about $15 for a new one, and you can go to sleep without worrying about blowing up your garage.
11/2/2017 10:27:37 PM •
Minn Kota...
•
Answered
on Nov 02, 2017
Not finding what you are looking for?