Midland Radio Communications - Page 5 - Recent Questions, Troubleshooting & Support

Check your charger.
Check your radio programming.
Post back with further questions.

Best regards.

Midland LXT326... | Answered on Feb 17, 2016

David; Radios are find, it is the stations you have to be careful about tuning into. check links below, informative.
press the helpful button
CB radio in west london UK picking up germans

Multimode AM FM SSB

midland 100m cb radio Transmission1


Midland Radio... | Answered on Feb 06, 2016

They can be used indoors or out. The range depends on line of sight. Imagine a flashlight, if you can see the beam, you will be able to talk. How far is that? In reality, not far for these low power off the shelf with short antenna radios. Expect 0.5 to 1 mile, more if outside and flat, less if indoor and lots of walls.

Midland Radio... | Answered on Jan 30, 2016

sounds like the cb section is way off frequency. Check it out first.

Midland Radio... | Answered on Jan 12, 2016

Check the SWR. also those style radios have small vertical boards.. in them and they come loose from the main board and wont TX or RX when that happens..

Midland Radio... | Answered on Jan 12, 2016

did you have it on channel lock. I mean look at the knobs and see if you have a 9 - 19 lock ?

Midland 75-785... | Answered on Dec 15, 2015

make sure the radio is in cb mode and your ex.sp. is plugged into the proper connection .

Midland 1001Z... | Answered on Oct 30, 2015

who is transmitting if it is someone else and you are hearing garbled it could be because they are using single side band on their A.M. CB radio .which your radio cannot detect.

Midland 75-785... | Answered on Oct 19, 2015

1) grnd 2) mic audio 3) trans audio 4) rec audio

Midland 1001Z... | Answered on Oct 19, 2015

Here you go, and it is GXT not GTX :>)


Midland Radio... | Answered on Oct 01, 2015

Is the mic plugged into the radio? Do you hear any hissing at all?Do you have an external speaker hooked to it if you do ,unhook it if not hook one to it , maybe your internal speaker is blown. Could be a switching diode.Could be your final . Could be you squelch knob isn't turned completely to the left or your RF gain isn't all the way to the right .

Midland Radio... | Answered on Sep 03, 2015

Its like the wiring in your house. That little three prong plug. There are three wires, one black,one white, and one green. The green is a ground wire , the black is neg flow and the white is positive flow. Well the red wire is hot ,the yellow wire is neg flow,and the black is ground. Some times the yellow wire isn't even connected. Look inside your radio and you will only see a red and black wire???you will have to google the radio model as such ( 77-118 owners manual)

Midland Radio... | Answered on Sep 03, 2015

Sams cb book # 267

Midland Radio... | Answered on Sep 01, 2015

the one I can think of would be www.claysradioshop.com . they are in west Texas . KDC sound is in Conroe, depending on your wants.there is cbcity in Tyler,Tx. Look them up on line and I'm sure you will find one.

Midland Radio... | Answered on Sep 01, 2015

time to invest in a newer radio.

Midland Radio... | Answered on Sep 01, 2015

Not finding what you are looking for?
Midland Logo

798 questions posted

Ask a Question

Usually answered in minutes!

Top Midland Radio Communications Experts


Level 3 Expert

1658 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Brad Brown

Level 3 Expert

18440 Answers

Are you a Midland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides